Description
Casting your own bullets is only half the job. Before those .309 slugs are ready to load, they need to be sized down to a consistent diameter and lubricated so they ride cleanly through the bore. The Lee Precision Lube & Sizing Kit .309 handles both chores with a simple push-through setup that bolts right onto the press you already own. The steel sizer die uses standard 7/8×14 threads, so it fits any single stage press built for that common thread pattern, and the bullet gets pushed through nose-first and drops into the included red catch container ready to go.
How the .309 Lube & Sizing Kit Works
The push-through design is what makes this kit so quick. Instead of fiddling with a dedicated top punch for every mold, the included punch rides in the ram where a shell holder normally sits and drives the bullet straight through the die. Because the bullet goes through base-first and exits the top, there's no need to match a nose punch to each bullet profile. The kit will also seat and crimp gas checks in place during the same stroke, which saves you a separate step when you're loading for higher velocity rifle rounds.
What You Get With the Lee .309 Bullet Sizing Kit
The kit includes the sizer die, the push-through punch, the red catch container, and instructions. A good rule of thumb when casting is to pick a sizing diameter about .001 inch over your bore's groove diameter, so the .309 kit is a popular choice for folks running .30 caliber rifle cartridges with cast bullets. Keep in mind that bullet lube such as Lee Liquid Alox and a reloading press are sold separately, since nearly everyone who sizes cast bullets already has a press on the bench.
Why Cast Shooters Reach for This Kit
For the money, this is one of the most popular sizing setups out there, and loaders who cast regularly tend to own several in different diameters. Sizing keeps every bullet uniform so it chambers freely and leaves consistently, which helps both reliability and accuracy at the bench.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 90038
- UPC: 734307900380
- Type: Lube & Size Kit
- Caliber/Diameter: .309 Diameter
- Thread Size: 7/8" x 14"
- Compatible With: Single Stage Presses
- Function: Size, Lube, and Gas Check Cast Bullets
- Material: Steel Sizer Die
- Media Type: Cast Bullets
- Finish: Silver
- Quantity: 1 Kit
- Length: 5.6 in
What’s Included
- Sizer die (.309)
- Push-through sizer punch
- Red plastic catch container
- Instructions
Frequently Asked Questions
Does the Lee .309 Lube & Sizing Kit come with bullet lube?
No, bullet lube is not included with this kit. Lee recommends their Liquid Alox, which is sold separately. A reloading press is also needed and is not part of the kit.
What press do I need for the Lee .309 Lube & Sizing Kit?
The sizer die uses standard 7/8×14 threads, so it fits any single stage press built for that thread pattern. The push-through punch rides in the ram in place of a shell holder. This kit is intended for single stage press use.
Do I need a special top punch for each bullet mold with this kit?
No, that's one of the best parts of this design. Bullets are pushed through the die nose-first, so there's no need to match a nose punch to each bullet profile. The single included punch handles the job for your .309 cast bullets.
Will the Lee .309 Sizing Kit handle gas checks?
Yes, the kit seats and crimps gas checks in place during the same push-through stroke that sizes and lubricates the bullet. That makes it handy for loading higher velocity .30 caliber rifle rounds with cast bullets.




Reviews
There are no reviews yet.