Description
The Carlson's Cremator is built for the hunter who lives for those stretched-out shots at wary waterfowl. This is the long range configuration in a .697 constriction, so it squeezes your pattern down tight for the birds that flare wide or won't commit to the decoys. It threads directly into Benelli Crio and Crio Plus barrels, and the extended, knurled body means you can twist it in and back it out with your fingers instead of digging around for a wrench.
What sets the Cremator apart from a standard tube is Carlson's Triple Shot Technology. Instead of one abrupt step down to the final constriction, there are three graduated rings in the taper that ease the shot column into the choke. That gentler transition cuts down on pellet deformation, trims the flyers, and gives you a denser, more even pattern where it counts. Carlson's also runs a parallel section about 25 percent longer than a typical choke, which is a big part of why these tubes pattern so consistently.
Why the Cremator Earns Its Spot in the Blind
The ported design is the other half of the story. Those muzzle ports bleed off gas at the end of the shot, which helps knock down muzzle jump so you can settle back on a second or third bird faster. For layout hunts and pass shooting where follow-ups matter, that recovery time is worth a lot.
Feeding the Cremator Choke Tube
Steel shooters can breathe easy here. The Cremator carries no size or speed restrictions with steel in its constrictions, and it plays nice with lead, Hevi-Shot, and bismuth loads too. It is machined from heat-treated 17-4 stainless steel with a matte black finish, made in the USA, and backed by Carlson's lifetime warranty. If a choke ever gets damaged, you send it back and they replace it, plain and simple.
Key Specifications
- Manufacturer: Carlson's Choke Tubes
- Manufacturer Part Number: 11507
- UPC: 723189115074
- Gauge: 12 Gauge
- Thread Pattern: Benelli Crio / Crio Plus
- Constriction: Long Range (.697)
- Configuration: Ported, Extended
- Material: Heat-Treated 17-4 Stainless Steel
- Finish: Matte Black
- Chokes Included: One Choke
- Shot Compatibility: Lead, Steel, Hevi-Shot, Bismuth
- Length: 7.7 in
- Country of Origin: USA
- Warranty: Lifetime
What’s Included
- One Carlson's Cremator ported long range choke tube
- Choke tube wrench
Frequently Asked Questions
What guns does this Cremator choke tube fit?
This tube is threaded for the Benelli Crio and Crio Plus systems in 12 gauge. If your Benelli barrel uses the Crio thread pattern, this one drops right in. It's a good idea to double-check your barrel's thread type before ordering, since Carlson's makes the Cremator for several different shotgun systems.
Can I shoot steel shot through the Cremator ported choke?
Yes. The Cremator has no size or speed restrictions with steel shot in this long range constriction. It's also rated for lead, Hevi-Shot, and bismuth, so you can run whatever load your hunt calls for without babying the tube.
What does the long range constriction actually do?
The long range version comes in at a .697 diameter, which is a tight squeeze meant to hold your pattern together at extended distances. It's the go-to choice for pass shooting and wary late-season birds that hang out past 40 yards. If most of your shots are closer over decoys, a mid or close range tube would open things up a bit more.
Do I need a wrench to install the Cremator choke tube?
Not really. The extended, knurled body is designed so you can thread it in and out by hand, which is handy in the cold or when your hands are wet. A choke wrench is included anyway for a final snug-up or if the tube ever gets stubborn.



Reviews
There are no reviews yet.