Description
The Barnes Banded Solid Bore Rider is a lead-free, 800-grain .510 caliber projectile cut from a homogenous copper-zinc alloy, so there's no core to separate and nothing to come apart on heavy bone. Instead of expanding, it holds its shape and plows straight through, which is exactly what you want from a true solid. With a 1.095 G1 ballistic coefficient and a 0.439 sectional density, this bullet carries its momentum a long way and bucks wind better than most in the class.
What Sets the Banded Solid Bore Rider Apart
The "banded" part of the name comes from the multiple relief rings machined into the shank. Those bands relieve pressure as the bullet travels down the bore and cut way down on copper fouling, which means more rounds between cleanings and more consistent pressures shot to shot. The spitzer boat tail profile and secant ogive are built for aerodynamic efficiency, and at 2.802 inches long this is a serious piece of metal.
Fitting the Bore Rider Into Your 50 BMG Load
This is a Bore Rider design intended for single-shot rifles with custom throats, where overall cartridge length isn't a limiting factor. It is not meant for standard-throat .50 BMG chambers, so if you're building loads for something like a custom long-range rig, this is where it shines. The bullet is also weight-matched to Barnes TSX bullets in the same caliber, so you can switch between solids and expanding bullets without chasing a new zero.
Reloading With the Barnes Banded Solid
Keep in mind these are component bullets, not loaded ammunition, so they're meant for reloaders working up their own .50 BMG recipes. The deep crimping grooves help lock the bullet in place under heavy recoil while still feeding cleanly. Guys running custom-throat rigs and Barrett-style platforms have reported excellent accuracy and tight groups with these downrange.
Key Specifications
- Manufacturer: Barnes
- Manufacturer Part Number: 30707
- UPC: 716876510801
- Caliber: .50 BMG (.510")
- Diameter: 0.510"
- Bullet Weight: 800 grains
- Bullet Style: Spitzer Boat Tail Banded Solid Bore Rider
- Ballistic Coefficient (G1): 1.095
- Sectional Density: 0.439
- Bullet Length: 2.802"
- Material: Homogenous Copper/Zinc Alloy
- Lead Free: Yes
- Ogive: Secant
- Quantity: 20 per box
What’s Included
- 20 Barnes Banded Solid Bore Rider .50 BMG 800 gr bullets
Frequently Asked Questions
Will the Barnes Banded Solid Bore Rider work in a standard 50 BMG rifle?
No. The 800-grain Banded Solid Bore Rider is designed for single-shot rifles with custom throats where overall cartridge length isn't a concern. It is not intended for standard-throat .50 BMG chambers, so it pairs best with custom long-range builds.
Are these loaded cartridges or just bullets?
These are component bullets only, not loaded ammunition. They're meant for handloaders building their own .50 BMG rounds, so you'll need cases, powder, and primers to complete the load. Each box contains 20 projectiles.
Can I switch between these solids and Barnes TSX bullets without re-zeroing?
That's the idea behind weight-matching. Barnes builds the Banded Solids to match the weight of the TSX bullets in the same caliber, so you can interchange them without varying your point of impact. It makes practicing with solids and hunting with expanding bullets a lot simpler.
Why does the Banded Solid have grooves cut into it?
Those are relief bands machined into the shank. They relieve pressure as the bullet moves down the bore and dramatically reduce copper fouling, which keeps pressures more consistent and means fewer trips to the cleaning rod.




Reviews
There are no reviews yet.