Description
The Barnes TAC-XP 155 grain is a .400 diameter, all-copper pistol bullet built for handloaders who want serious defensive performance out of their .40 S&W or 10mm loads. These are projectiles only, not loaded ammunition, so you'll be seating them over your own powder and primer. Each box holds 40 bullets, and the monolithic copper build is the whole story here: no jacket to separate, no lead core to shed, just one solid piece of copper that stays together when it hits something.
What Sets the TAC-XP 155 gr Apart
Barnes machines these from 100 percent copper with a flat base and a deep hollow-point nose cavity. That cavity is engineered to peel back into sharp petals and expand to roughly double the original diameter, while the solid construction keeps weight retention near total even after punching through heavy clothing, drywall, or auto glass. The result is consistent penetration depth and a bullet that performs the same way shot after shot. Being lead-free, they also keep practice ranges and indoor environments cleaner.
Loading the Barnes .400 155 Grain TAC-XP
This bullet carries a .400 inch diameter, a G1 ballistic coefficient of 0.189, and a sectional density of 0.138, making it a flexible choice for both .40 S&W and 10mm Auto cases. Copper monolithics tend to be a touch longer than lead bullets of the same weight, so pay attention to seating depth and overall length, and start low while working up to your pressure node. Published Barnes load data is widely available for this projectile, which takes the guesswork out of developing an accurate, reliable self-defense handload.
Who Reaches for This Bullet
These have a strong following with law enforcement reloaders, home-defense handloaders, and anyone running a lead-free program. TAC-XP bullets have earned their reputation performing well in FBI-style test protocols, and that same design is what Barnes loads into its factory TAC-XPD defense ammunition. If you roll your own defensive .40 or 10mm, this is a dependable component to build around.
Key Specifications
- Manufacturer: Barnes
- MPN: 30504
- UPC: 716876400065
- Product Line: M/LE TAC-XP
- Caliber: .40 Caliber / 10mm
- Bullet Diameter: .400 inch
- Bullet Weight: 155 Grain
- Bullet Type: Solid Copper Hollow Point, Flat Base
- Lead Free: Yes, 100% Copper
- G1 Ballistic Coefficient: 0.189
- Sectional Density: 0.138
- Quantity: 40 Bullets
- Country of Origin: USA
What’s Included
- 40 Barnes TAC-XP 155 grain .400 caliber solid copper hollow point bullets
Frequently Asked Questions
Are the Barnes TAC-XP 155 grain bullets loaded ammunition?
No. These are reloading components, meaning the projectiles only. You supply your own brass, powder, and primers to assemble finished cartridges. If you want loaded rounds instead, look at Barnes TAC-XPD or VOR-TX factory ammunition.
What calibers can I load with the .400 155 grain TAC-XP?
The .400 inch diameter makes these a fit for both .40 S&W and 10mm Auto. Barnes publishes load data for this bullet, so you can tailor your recipe to whichever cartridge you're building. Always work up from a starting charge and watch your overall length.
Why choose an all-copper bullet like the TAC-XP?
The monolithic copper construction means there's no jacket and core to separate, so the bullet retains nearly all its weight and penetrates consistently. The deep hollow-point cavity still opens up reliably, even through barriers like heavy clothing. Being lead-free is a bonus for keeping ranges and indoor environments clean.
Do copper bullets need different seating depth than lead?
Often, yes. Copper projectiles tend to run a bit longer than lead bullets of the same weight, so you'll want to confirm your overall length and make sure rounds feed and chamber in your specific pistol. Start with published Barnes data and verify fit before loading a full batch.




Reviews
There are no reviews yet.