Description
If you roll your own .40 S&W or 10mm defensive loads, the Barnes TAC-XP 125 gr is one of the most proven copper bullets you can seat. These are a 100 percent copper, lead-free projectile measuring .400 inches in diameter with a flat base and a wide, deep hollow-point cavity. At 125 grains they run on the lighter end for the caliber, which lets you push them to higher velocity and take full advantage of the way Barnes copper expands.
What Sets the TAC-XP 125 gr Apart
Barnes originally developed the TAC-XP line for law enforcement and personal defense work, and the design shows it. The all-copper build means the bullet holds onto its weight instead of shedding a lead core, so it tends to track straight and keep penetrating after hitting intermediate barriers like auto glass, sheet metal, and plywood. That deep nose cavity is what drives the expansion, peeling back into sharp copper petals while retaining nearly all of its original mass.
Reloading the .400" TAC-XP
These ship 40 to a box and are component bullets only, not loaded ammunition. The flat-base profile makes seating straightforward on a single-stage or progressive press, and reloaders consistently report uniform weights from box to box. Published specs put the ballistic coefficient at 0.113 with a sectional density of 0.112 and an overall length right around .622 inches. Because copper bullets carry a longer bearing surface than a comparable lead-core bullet, it pays to work up your charge carefully and pull current Barnes load data for the 125-grain .400" bullet before you commit to a full run.
Who Reaches for These
This bullet is a favorite for folks building carry or barrier-defeating loads in a Glock 20, 29, or any solid .40 or 10mm platform. If you want the lighter, faster side of the copper lineup and value expansion plus deep penetration over bulk plinking economy, the 125 gr TAC-XP earns its spot on the bench.
Key Specifications
- Manufacturer: Barnes
- Manufacturer Part Number: 30500
- UPC: 716876400034
- Caliber: .40 S&W / 10mm
- Bullet Weight: 125 grain
- Bullet Diameter: .400"
- Bullet Style: TAC-XP Flat Base Hollow Point
- Bullet Material: 100% Copper, Lead-Free
- Ballistic Coefficient: 0.113
- Sectional Density: 0.112
- Overall Length: 0.622"
- Cannelure: No
- Quantity: 40 per box
- Country of Origin: Made in USA
What’s Included
- 40 Barnes TAC-XP 125 gr .400" copper hollow-point bullets (component projectiles, not loaded ammunition)
Frequently Asked Questions
Are the Barnes TAC-XP 125 gr bullets loaded ammunition?
No. These are component bullets intended for handloading, not finished cartridges. You'll need your own brass, primers, and powder to assemble a complete round. Each box contains 40 projectiles.
What calibers can I load these .400" TAC-XP bullets in?
The .400 inch diameter makes them suited for .40 S&W and 10mm Auto. Both cartridges share the same bullet diameter, so the same projectile works across either case. Always follow current Barnes load data for the 125-grain .400" bullet when working up a charge.
Why choose an all-copper bullet like the TAC-XP?
The 100 percent copper construction keeps the bullet in one piece instead of separating a lead core from a jacket, so it retains nearly all of its weight. That translates to deep, straight-tracking penetration and reliable expansion, even after passing through barriers. It's also lead-free, which is a plus for indoor ranges and environmentally sensitive areas.
Do copper bullets like these need different load workups than lead-core bullets?
Yes, it's worth paying attention here. Copper bullets typically have a longer bearing surface for the same weight, which can affect pressure and seating depth. Start at published Barnes starting loads and work up gradually while watching your overall length and chronograph numbers.



Reviews
There are no reviews yet.