Description
For anyone loading up a .375 H&H, .375 Ruger, or another big-bore chambering, this 250 grain Tipped TSX is one of the most trusted projectiles Barnes makes. It carries the same all-copper, lead-free construction the TSX built its reputation on, with grooved rings cut into the shank to reduce fouling and pressure. The added polymer tip sharpens the profile, bumps up the ballistic coefficient to .424, and kicks off reliable expansion the moment it hits hide.
What Sets the .375 Tipped TSX Apart
When this bullet makes contact, the nose peels back into four razor-sharp copper petals that open to roughly double the original diameter. That creates a wide wound channel while the solid copper body keeps driving forward, so you get both expansion and the deep, straight-line penetration that heavy game demands. Because there's no lead core to separate, weight retention runs close to 100 percent, which matters a great deal when you're putting a bullet through thick muscle and bone.
Loading the 250 gr TTSX Boat Tail
These are component bullets for handloaders, not loaded ammunition, so you'll be building your own rounds. Barnes recommends starting with the bullet seated about 0.050 inches off the lands, though many reloaders find their best groups somewhere in the .030 to .070 window and work from there. The boat tail base makes seating easier and helps the bullet hold velocity and resist wind drift at longer ranges. A cannelure is present for a solid crimp if your load calls for one.
This is a go-to choice for plains game, elk, moose, big bears, and the kind of African hunting the .375 was practically made for. If you want a bullet that shoots accurately, opens up fast, and comes out the far side, the 250 grain Tipped TSX earns its keep.
Key Specifications
- Manufacturer: Barnes
- Manufacturer Part Number: 30484
- UPC: 716876375424
- Series: Tipped TSX (TTSX)
- Caliber: .375 Caliber
- Bullet Diameter: .375 inch
- Bullet Weight: 250 Grain
- Bullet Style: Spitzer Boat Tail
- Bullet Tip Material: Polymer
- Core / Jacket Material: 100% Solid Copper
- Ballistic Coefficient (G1): .424
- Sectional Density: .254
- Bullet Length: 1.438 inch
- Cannelure: Yes
- Recommended Usage: Hunting
- Quantity: 50 Per Box
What’s Included
- 50 Barnes Tipped TSX .375 Caliber 250 Grain Boat Tail component bullets
Frequently Asked Questions
What cartridges can I load the .375 250 gr Tipped TSX in?
This is a .375 caliber, .375 inch diameter component bullet, so it works in any cartridge using that diameter projectile. Popular options include the .375 H&H Magnum, .375 Ruger, and .375 Weatherby. Always build your loads from current published Barnes load data for your specific cartridge.
Are these loaded rounds or just the bullets?
These are component bullets for reloading only, not loaded ammunition. You'll need your own brass, primers, and powder to assemble finished cartridges. The box contains 50 projectiles.
How deep should I seat the Barnes TTSX .375 bullets?
Barnes suggests starting around 0.050 inches off the lands as a baseline. Many reloaders fine-tune within the 0.030 to 0.070 inch range to find the best accuracy in their particular rifle. Work up carefully and let the groups tell you where this bullet likes to sit.
Why choose an all-copper bullet like the TTSX?
The solid copper construction means there's no lead core to separate, so weight retention stays near 100 percent for deep, reliable penetration. On impact the nose opens into four petals that roughly double the bullet diameter for a wide wound channel. It's a proven setup for large, tough game.




Reviews
There are no reviews yet.