0
0

Barnes TSX 9.3mm (.366″) 250gr Flat Base Bullets – 50 Count

UPC: 716876366255

$61.99

6 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Barnes TSX 9.3mm (.366") 250-grain flat-base bullet is the component of choice when you want controlled expansion and deep penetration out of a 9.3mm handload. Machined from 100 percent copper with no lead core, this projectile holds together through bone and heavy tissue, which is exactly what you want when chasing larger game. The hollow point nose is engineered to peel back into four razor-sharp petals on impact while the shank drives straight ahead.

What Makes the 9.3mm TSX Tick

Barnes introduced the TSX back in 2003, and it became their most popular hunting bullet for good reason. The all-copper build means the bullet retains nearly all of its original 250-grain weight, so energy keeps pushing deep instead of fragmenting and stalling. Multiple grooves, or relief rings, are cut into the bullet shank. Those rings give displaced copper somewhere to go as the bullet travels down the bore, which helps cut fouling and can ease pressure on warmer loads.

Specs That Matter When You're Loading

This one carries a .366 diameter, a sectional density of .267, and a ballistic coefficient of .361, with an overall bullet length right around 1.371 inches. It's a flat-base profile rather than a boat tail, and it feeds a wide family of 9.3mm cartridges including the 9.3x62mm Mauser, 9.3×57, 9.3×64, and 9.3x74R. Barnes recommends starting your seating depth around 0.030 to 0.070 inches off the lands and working from there, since copper bullets tend to reward a little load tuning for best accuracy.

Dialing In Your 9.3mm TSX Loads

Keep in mind these are reloading components, not loaded ammunition, so you'll be assembling your own rounds. Copper monometal bullets like the TSX run a touch longer than lead-core bullets of the same weight, which affects powder space, so working up from published starting loads is the smart way to go. Clean, consistent brass and careful seating depth will get the most out of what this bullet can do.

Key Specifications

  • Manufacturer: Barnes
  • Manufacturer Part Number: 30469
  • UPC: 716876366255
  • Bullet Type: TSX Flat Base
  • Caliber: 9.3mm
  • Bullet Diameter: .366"
  • Bullet Weight: 250 grain
  • Jacket Material: Copper Solid
  • Core Material: Copper Solid (100% copper, lead free)
  • Bullet Tip: Hollow Point
  • Cannelure: Yes
  • Ballistic Coefficient (G1): .361
  • Sectional Density: .267
  • Bullet Length: 1.371"
  • Quantity: 50 per box
  • Country of Origin: USA

What’s Included

  • 50 Barnes TSX 9.3mm (.366") 250-grain flat-base bullets

Frequently Asked Questions

Are these Barnes TSX 9.3mm bullets loaded ammunition?

No, these are reloading components only, not loaded cartridges. You'll seat them into your own prepped 9.3mm brass with a powder charge and primer. They cannot be fired as they come in the box.

What cartridges will the 9.3mm .366 TSX work in?

This .366 diameter bullet is built for the family of 9.3mm cartridges, including the 9.3x62mm Mauser, 9.3×57, 9.3×64, and 9.3x74R. As long as your rifle uses a .366 bore and your loading data supports a 250-grain copper bullet, you're in business. Always cross-check published load data for your specific cartridge.

Why choose an all-copper TSX over a lead-core bullet?

The TSX is 100 percent copper with no lead core, so it holds together and retains close to its full 250-grain weight on impact. That translates to deep, straight-line penetration and four cutting petals that open reliably on game. Copper bullets also tend to foul the bore less than traditional lead-core designs.

What seating depth works best with the 9.3mm TSX?

Barnes suggests starting around 0.030 to 0.070 inches off the lands and adjusting from there. Copper monometal bullets often reward a bit of load tuning, so testing a few seating depths will help you find the sweet spot for your rifle. Begin with published starting loads and work up carefully.

Additional information

UPC

716876366255

Manufacturer

Manufacturer Part Number

30469

Caliber/Gauge

9.3mm

Grains

250

Quantity

50

Shipping Weight

1.65

Reviews

There are no reviews yet.

Be the first to review “Barnes TSX 9.3mm (.366″) 250gr Flat Base Bullets – 50 Count”