Description
The Barnes Tipped TSX is the lead-free hunting bullet a lot of 8mm reloaders swear by once they try it. This is the 160-grain, .323 diameter version with a boat tail base, built on a solid copper body with multiple rings cut into the shank and finished off with a polymer tip up front. That tip does two jobs: it raises the ballistic coefficient to 0.400 (G1) for better downrange retention, and it drives into a re-engineered nose cavity to kick off fast, reliable expansion when it hits.
What makes the TTSX stand out is how it behaves after impact. The copper construction holds together in the 99 to 100 percent range for weight retention, and the nose opens into four razor-sharp petals that effectively double the bullet's diameter. You get deep, straight-line penetration with a wide wound channel, which is exactly what you want when you're putting one bullet on an animal and expecting it to do the work.
Loading the Barnes TTSX 8mm in Your 8×57 or 8mm Mag
This bullet covers a wide range of 8mm chamberings, from the classic 8×57 Mauser up through the 8mm Remington Magnum and the various European 8×60 and 8×68 cartridges. Because it's all copper, it runs a touch longer than a lead-core bullet of the same weight, so it likes a little room to breathe. Barnes suggests starting around 0.050 inch off the lands, then testing anywhere from 0.030 to 0.070 inch to find the sweet spot your particular barrel shoots best.
Why 8mm Hunters Reach for the TTSX
With a sectional density of 0.219 and that 160-grain weight, this bullet is a solid match for deer and medium game, and the retained weight gives you confidence on heavier-bodied animals too. The grooved shank also helps keep pressures and copper fouling down, so your barrel stays cleaner round after round. These ship as component projectiles for handloading, not loaded ammunition.
Key Specifications
- Manufacturer: Barnes
- Manufacturer Part Number: 30400
- UPC: 716876323623
- Caliber: 8mm
- Bullet Diameter: .323"
- Bullet Weight: 160 Grain
- Bullet Style: Tipped TSX (TTSX) Boat Tail
- Construction: Solid Copper, Lead-Free
- Tip Material: Polymer
- Ballistic Coefficient (G1): 0.400
- Sectional Density: 0.219
- Bullet Length: 1.279"
- Cannelure: Yes
- Quantity: 50 Per Box
What’s Included
- 50 Barnes TTSX 8mm (.323) 160 gr Boat Tail bullets
Frequently Asked Questions
What cartridges can I load the Barnes TTSX 8mm bullets in?
These .323 diameter, 160-grain bullets work across the 8mm family, including the 8×57 Mauser, 8mm Remington Magnum, and various European rounds like the 8×60 S and 8×68 S. As long as your cartridge uses .323 projectiles, these will fit. Always work up loads using current published data for your specific cartridge.
Are these Barnes TTSX bullets lead-free?
Yes, the TTSX is built from a 100 percent copper body with no lead at all. That's a big reason hunters choose them, both for terminal performance and for areas where non-lead projectiles are preferred. The polymer tip up front is the only non-copper component.
How deep should I seat the TTSX off the lands?
Barnes recommends starting with the bullet seated about 0.050 inch off the lands. From there, test seating depths between 0.030 and 0.070 inch to find where your rifle groups best. Copper monolithic bullets can be a little picky about jump, so it's worth spending a range session dialing it in.
How much weight does the TTSX retain on impact?
Because of the solid copper construction, the TTSX typically holds onto 99 to 100 percent of its weight after impact. The nose opens into four sharp petals that roughly double the bullet's diameter while the base drives straight through for deep penetration. That combination is what gives it such a strong reputation for clean, quick kills.




Reviews
There are no reviews yet.