Description
The Barnes LRX (Long-Range X) is a .30 caliber, 200 grain monolithic hunting bullet for handloaders who want reach and terminal punch in the same package. Built on an all-copper, lead-free body with a polymer tip, it carries a .546 G1 ballistic coefficient and a .301 sectional density, so it bucks wind well and holds velocity out where lesser bullets start to fade. The long ogive and boat-tail heel are what give it that slick profile, and Barnes leaned on Doppler radar during development to fine-tune the shape for low drag and accuracy at extended distances.
What Sets the 200 gr .30 Cal LRX Apart Downrange
This is a design that came out of the proven Tipped TSX family, stretched out for better long-range numbers. The polymer tip kicks off expansion on impact, peeling the nose cavity open into four sharp petals that cut a wide wound channel. Because it's solid copper, it retains close to all of its weight, which keeps momentum driving through heavy muscle and bone. That combination makes it a solid pick for elk, moose, and big deer, and plenty of handloaders run it in cartridges from the .308 Win up through the .300 magnums.
Loading the Barnes LRX for Best Accuracy
Mono-metal bullets like the LRX tend to shoot best with a good bit of jump to the rifling. A common starting point among experienced reloaders is around .050 inches off the lands, then working deeper in small increments to find the node your rifle likes, and it's not unusual for the sweet spot to land out past .100 inches. Barnes publishes solid load data worth starting with, and a 1:10 twist or faster is recommended to stabilize this 200 grain pill. Overall length runs about 1.713 inches, and the bullet does feature a cannelure if you want to crimp. These are component bullets only, not loaded ammunition, so you'll be supplying your own brass, powder, and primers.
Key Specifications
- Manufacturer: Barnes
- Manufacturer Part Number: 30374
- UPC: 716876308804
- Bullet Caliber: .30 Caliber
- Bullet Diameter: .308"
- Weight: 200 Grain
- Bullet Type: LRX Boat Tail
- Bullet Tip Material: Polymer
- Core Material: Copper Solid
- Jacket Material: Copper Solid
- Ballistic Coefficient (G1): .546
- Sectional Density: .301
- Cannelure: Yes
- Recommended Twist Rate: 1:10" or faster
- Recommended Usage: Long Range Hunting
- Quantity: 50 Per Box
What’s Included
- 50 Barnes LRX .30 Caliber 200 grain boat tail reloading bullets
Frequently Asked Questions
Is the Barnes LRX .30 Cal 200 gr loaded ammunition or just the bullet?
These are component bullets only, meant for handloading. You'll need to supply your own brass, powder, and primers to build a finished cartridge. They come 50 to a box.
What twist rate do I need to stabilize the 200 gr LRX?
Barnes recommends a 1:10 inch twist or faster for this 200 grain bullet. That's because it's a long, all-copper design, and copper bullets run longer than lead-core bullets of the same weight. Most modern .30 caliber hunting rifles will handle it fine.
Where should I seat the Barnes LRX for the best accuracy?
Mono-metal bullets like the LRX generally like a healthy amount of jump to the rifling. A good starting point is about .050 inches off the lands, then working deeper in small increments until you find the group your rifle likes. Some rifles don't settle in until .100 inches or more, so it's worth testing a few seating depths.
What game is the 200 gr LRX good for?
This bullet is built for long-range hunting and larger big game. The all-copper construction and high weight retention make it a strong choice for elk, moose, and heavy-boned deer at both close and extended distances. The .546 ballistic coefficient helps it hold velocity and resist wind the farther out you reach.




Reviews
There are no reviews yet.