Description
The Barnes Tipped TSX in .308 diameter and 168 grains is one of the most trusted all-copper hunting bullets you can seat in a case. Barnes machines the entire body from 100-percent copper, so there is no lead core and no jacket to separate on impact. That construction is the whole point: these bullets hold together through hide, bone, and muscle, delivering deep, straight-line penetration and holding onto nearly all of their weight. A polymer tip sits up front to lift the ballistic coefficient and get expansion started the moment it hits, while the boat-tail base keeps things stable downrange.
What Sets the TTSX Apart
The signature feature here is the set of grooved rings cut into the bullet shank. As the copper rides down the bore, those relief grooves give the metal somewhere to flow, which lowers pressure and cuts way down on copper fouling. That means cleaner barrels and, in a lot of rifles, room to push velocity a touch higher. On impact, the nose opens into four razor-sharp petals that peel back to roughly double the bullet's diameter, so you get a wide wound channel without losing the penetration copper is known for. This is the 30-caliber bullet reloaders reach for when they want one projectile that does it all from deer to elk.
Specs That Matter for Your Load
This is a 168 grain, .308-inch bullet with a G1 ballistic coefficient of .470 and a sectional density of .253. It runs best out of a 1:11 twist barrel or faster, so check your rifle before you work up a load. Barnes suggests starting around .050 inch off the lands and tuning from there, since most rifles settle into their sweet spot somewhere in the .030 to .070 range.
Working Up a Load with the Barnes TTSX
Keep in mind these are component bullets for handloading, not loaded ammunition. Because copper is longer than lead for a given weight, seating depth and powder charge both reward a careful workup. Spend a little time at the bench finding the node your barrel likes, and these bullets pay you back with tight groups and dependable terminal performance in the field. Sold 50 to the box.
Key Specifications
- Manufacturer: Barnes
- Model: Tipped TSX (TTSX)
- Manufacturer Part Number: 30370
- UPC: 716876308781
- Caliber: .30 Caliber (.308)
- Bullet Diameter: .308"
- Bullet Weight: 168 Grains
- Bullet Style: Tipped TSX Boat Tail
- Construction: 100% Copper, Lead-Free
- Tip Material: Polymer
- Ballistic Coefficient (G1): 0.470
- Sectional Density: 0.253
- Recommended Twist: 1:11" or faster
- Recommended Usage: Hunting
- Quantity: 50 per Box
What’s Included
- 50 Barnes TTSX 168gr .308 Tipped Boat Tail bullets (component projectiles, not loaded ammunition)
Frequently Asked Questions
Are the Barnes TTSX 168gr .308 bullets lead-free?
Yes. The TTSX is machined from 100-percent copper with no lead core, so it qualifies as a nonlead bullet. That solid copper build is also why it holds together and retains nearly all its weight on impact.
What barrel twist do I need to stabilize these 168gr TTSX bullets?
Barnes recommends a 1:11 inch twist or faster for this bullet. Copper bullets run a bit longer than lead-core bullets of the same weight, so twist rate matters. If your .308 or .30-caliber rifle has a standard 1:10 or 1:11 twist, you're in good shape.
Where should I seat the Barnes TTSX when working up a load?
Barnes suggests starting around .050 inch off the lands as a baseline. From there, most rifles shoot their best somewhere between .030 and .070 inch off the lands, so it pays to test a few seating depths. Dialing in that distance is often the key to getting tight groups with monolithic copper bullets.
Is this loaded ammunition or a reloading component?
These are component bullets for handloading, not loaded cartridges. You'll need your own brass, primers, and powder to assemble finished rounds. Each box contains 50 projectiles.








Reviews
There are no reviews yet.