Description
If you handload for a 7mm and want a bullet that punches above its weight, the Barnes 110-grain Tipped TSX is a proven performer. It's an all-copper projectile, so there's no lead core to come apart on impact. Instead, the nose opens into four razor-sharp petals that roughly double the bullet's diameter, while the body keeps driving straight through for the kind of deep, consistent penetration that puts animals down fast. With a G1 ballistic coefficient of 0.319 and a sectional density of 0.195, this light-for-caliber 7mm bullet gets up to speed quickly and holds its line downrange.
What Sets the 110gr Tipped TSX Apart
The big upgrade over the standard TSX is that green polymer tip. It streamlines the nose for a better BC, protects the hollow point from deforming in the magazine, and initiates expansion the moment it hits. Barnes also cuts relief grooves into the shank, which reduces bearing surface and pressure while helping the bullet foul the bore less than you'd expect from a solid copper design. Weight retention runs right around 99 to 100 percent, so you get full penetration on heavier game without the bullet shedding mass.
Loading the Barnes 7mm 110gr TTSX
These measure out to the standard .284 diameter at roughly 1.139 inches in overall length, flat base. Copper bullets tend to like a little more jump than lead-core projectiles, and Barnes has long recommended starting your seating depth somewhere between 0.030 and 0.070 inches off the lands, then tuning from there for your particular rifle. Work up your charge from published data and most 7mm shooters find a tight node without much fuss. In cartridges like the 7mm-08, .280, or 7mm Rem Mag, this 110-grain pill makes for a flat-shooting, hard-hitting deer and hog load.
Bottom line, if you want a copper bullet that shoots accurately and performs reliably on game, the Tipped TSX has earned its reputation over two decades of field use.
Key Specifications
- Manufacturer: Barnes
- Manufacturer Part Number (MPN): 30296
- UPC: 716876284702
- Caliber: 7mm (.284 Caliber)
- Bullet Diameter: 0.284 in
- Bullet Weight: 110 Grain
- Bullet Style: Tipped TSX (TTSX) Flat Base
- Tip Material: Polymer
- Construction: 100% Copper, Lead-Free
- G1 Ballistic Coefficient: 0.319
- Sectional Density: 0.195
- Overall Length: 1.139 in
- Cannelure: Yes
- Quantity: 50 Bullets
What’s Included
- 50 Barnes 7mm (.284) 110gr Tipped TSX (TTSX) flat base bullets
Frequently Asked Questions
Are the Barnes TTSX 7mm bullets lead-free?
Yes, these are built from 100 percent copper with no lead core. That solid construction is what gives the TTSX its deep penetration and near-total weight retention. It also makes them a solid pick anywhere lead-free projectiles are preferred for hunting.
What seating depth works best for the 110gr Tipped TSX?
Copper bullets generally shoot best with a bit more jump to the lands than lead-core bullets. Barnes recommends starting between 0.030 and 0.070 inches off the lands and tuning from there for your specific rifle. From that window most handloaders can dial in a tight, repeatable group.
What 7mm cartridges can I load these in?
At .284 diameter, this 110-grain bullet works across the 7mm family, including the 7mm-08 Remington, .280 Remington, .280 Ackley Improved, and 7mm Remington Magnum. Being light for caliber, it gets moving fast and shoots flat. Just be sure to use load data published for solid copper bullets in your chosen cartridge.
What game is the 7mm 110gr TTSX good for?
This bullet is a strong performer on deer, hogs, antelope, and similar big game. The polymer tip drives fast expansion while the copper shank keeps penetrating for complete pass-through on most shots. With its high velocity and reliable terminal performance, it earns its keep in the field.



Reviews
There are no reviews yet.