Description
The Barnes LRX (Long-Range X) in 7mm is a 145 grain, all-copper bullet aimed squarely at hunters who like to reach out there. Measuring .284 in diameter with a sleek 1.422 inch profile, it carries a G1 ballistic coefficient of .486 and a sectional density of .257, which is the kind of number that keeps velocity and energy up at distance and shrugs off wind drift better than shorter, blunter designs. Barnes developed the LRX to keep pace with today's accurate rifles and high-magnification optics, and the long ogive paired with a precision heel radius on the boat tail is a big part of why it flies the way it does.
What Sets the Barnes LRX 7mm Apart
The heart of this bullet is a solid copper body with no lead core, topped by a polymer tip that both boosts BC and kicks off expansion the moment it hits. On impact the scored nose cavity peels back into four razor-sharp petals and opens up to roughly double its original diameter, carving a wide wound channel while the copper construction hangs onto most of its weight. That combination of deep penetration and high retained weight is what makes it such a dependable choice on everything from deer and antelope to tougher, heavier game.
Loading the 145 gr LRX Boat Tail
These are components, not loaded ammo, so you're seating them yourself. Barnes recommends a 1:9.5 twist or faster to stabilize this bullet, and copper monometals like a little room to run. A good starting point is around .050 inch of jump off the lands, then test in .025 inch increments to find the node your rifle likes best. Plenty of handloaders end up well past .050, so don't be shy about a longer jump if groups aren't where you want them. The Accu-Groove rings along the shank help cut fouling and keep pressures manageable, which makes load development a bit friendlier. This 145 grain weight is a popular pick for cartridges like the 7mm Rem Mag, 7mm-08, .280 Rem, 28 Nosler, and 7mm PRC.
Key Specifications
- Manufacturer: Barnes
- Manufacturer Part Number: 30282
- UPC: 716876284047
- Bullet Caliber: 7mm (.284)
- Bullet Diameter: .284 in
- Weight: 145 Grains
- Bullet Style: LRX Polymer Tip Boat Tail
- Construction: Solid Copper, Lead Free
- G1 Ballistic Coefficient: .486
- Sectional Density: .257
- Bullet Length: 1.422 in
- Recommended Twist Rate: 1:9.5 or faster
- Quantity: 50 Per Box
What’s Included
- 50 Barnes LRX 7mm (.284) 145 gr boat tail bullets (projectiles only, not loaded ammunition)
Frequently Asked Questions
Are the Barnes LRX 7mm 145 gr bullets loaded ammunition or components?
These are component projectiles only, meant for handloading. The box contains 50 bullets with no brass, powder, or primers. You'll be seating them into your own prepared cases.
What twist rate do I need to stabilize the 145 gr LRX in 7mm?
Barnes lists a recommended twist rate of 1:9.5 or faster for this bullet. That rate suits most modern 7mm hunting rifles, including the 7mm Rem Mag, 7mm-08, .280 Rem, and 7mm PRC. If your barrel is slower than that, the long LRX profile may not stabilize properly.
How far off the lands should I seat the Barnes LRX?
Barnes suggests starting with a minimum jump of about .050 inch off the lands, then adjusting in roughly .025 inch increments to find your rifle's sweet spot. Solid copper bullets like the LRX often shoot best with more jump than jacketed bullets, so some loads land well past .050. It's worth running a seating depth test rather than settling on the first group.
What game is the 145 gr LRX suited for?
This bullet is built for long-range hunting and performs across a wide range of game thanks to its deep penetration and high retained weight. The all-copper design opens into four petals and holds together well, making it a solid choice for deer, antelope, elk, and other medium to large game. Being lead-free also makes it a good fit for hunters who want copper projectiles.





Reviews
There are no reviews yet.