Description
The Barnes TSX in .277 diameter, 140 grain is one of the most trusted all-copper hunting bullets you can load for the .270 Winchester. Machined from 100 percent copper with no lead core, it holds together through heavy bone and muscle and comes out the other side still shaped like a bullet. That consistency is what put the Triple-Shock X on the map, and it still earns its reputation in the field today.
What Makes the Barnes TSX 140 gr Tick
On impact, the hollow point peels back into four razor-sharp petals that increase the bullet's diameter and cut a wide wound channel while driving deep. Because there's no lead and no jacket to separate, these bullets routinely retain close to 100 percent of their original weight. Barnes rates this one at a .404 ballistic coefficient with a .261 sectional density, so it carries energy well and bucks wind better than a lot of lighter options in the caliber.
Reloading the .277 140 gr TSX Boat Tail
The boat tail base makes seating cleaner and helps stabilize the bullet downrange. A standout feature of the TSX is the series of precision rings cut into the shank. Those grooves act as relief points as copper flows under pressure in the bore, which helps reduce fouling and tames pressure on higher velocity loads. Barnes suggests starting around 0.050 inches off the lands, with most rifles printing their best groups somewhere between 0.030 and 0.070 inches off. A little load tuning goes a long way with monolithic bullets, so plan to experiment with seating depth and charge weight.
Field Use for the .270 Win Hunter
For whitetail, mule deer, antelope, and black bear, this 140 grain TSX is a dependable pick in the .270 Winchester. The standard 1:10 twist found on most .270 rifles stabilizes it without issue. If you want clean pass-throughs, reliable expansion, and a bullet that won't come apart on the shoulder, this is a solid choice to build a hunting load around. Keep in mind these are component bullets for handloading, not loaded ammunition.
Key Specifications
- Manufacturer: Barnes
- Manufacturer Part Number: 30266
- UPC: 716876277445
- Model: TSX (Triple-Shock X)
- Caliber: .270 Caliber
- Bullet Diameter: .277 in
- Bullet Weight: 140 grain
- Bullet Type: TSX Boat Tail Hollow Point
- Core Material: Solid Copper (Lead-Free)
- Ballistic Coefficient (G1): 0.404
- Sectional Density: 0.261
- Cannelure: Yes
- Recommended Usage: Hunting
- Quantity: 50 Per Box
What’s Included
- 50 Barnes TSX 140 gr .270 Caliber (.277) boat tail bullets
Frequently Asked Questions
Are the Barnes TSX 140 gr .277 projectiles loaded ammunition?
No, these are component bullets intended for handloading, not finished cartridges. You'll need your own brass, primers, and powder to assemble loaded ammo. They're sized .277 diameter specifically for the .270 Winchester and other .277 bore cartridges.
What seating depth works best with the TSX 140 gr?
Barnes recommends starting around 0.050 inches off the lands, then tuning from there. Most rifles find their best accuracy somewhere between 0.030 and 0.070 inches off the lands. Since monolithic copper bullets can be particular, it pays to test a few seating depths with your rifle.
Does the 140 grain TSX require a special barrel twist?
The standard 1:10 twist found on most .270 Winchester rifles stabilizes this 140 grain bullet without any trouble. Barnes load data for the 140 gr TSX BT lists a 1:10 twist rate as suitable. Heavier or longer copper bullets sometimes need faster twists, but this one is right at home in a typical .270.
What game is the Barnes TSX 140 gr good for?
This all-copper bullet is a strong choice for deer, antelope, and black bear in the .270 Winchester. The deep penetration and near-complete weight retention make it reliable on larger-bodied animals where you need to punch through heavy bone. It expands into four cutting petals while holding together through the shot.



Reviews
There are no reviews yet.