Description
The Barnes TSX in .277 diameter and 130 grain is the go-to copper bullet for folks loading the .270 Winchester, and for good reason. Built from 100% copper with no lead core, this Triple-Shock X design holds together on impact and drives deep, which is exactly what you want when a shot angles through heavy bone and muscle. It carries a sectional density of .242 and a G1 ballistic coefficient of .374, giving it a flat, predictable arc inside normal hunting ranges.
What Makes the Barnes TSX Different
The signature feature here is the set of precisely machined grooves cut into the bullet's shank. As the copper flows under pressure traveling down the bore, it expands into these relief grooves rather than smearing against the rifling. The payoff is reduced chamber pressure, noticeably less copper fouling, and tighter groups once you dial in your load. When the bullet hits game, the hollow point peels back into four sharp petals that stay attached, so you get a wide wound channel without the fragmentation and weight loss you'd see from a cup-and-core bullet.
Loading the .277 130 gr TSX
Since copper is less dense than lead, these bullets run a touch longer than a comparable lead-core 130 grain, so pay attention to seating depth and powder capacity. Barnes recommends starting around .050 inches off the lands, then testing anywhere from .030 to .070 inches to find the sweet spot in your particular rifle. Standard 1:10 twist .270 Win barrels stabilize this 130 grain beautifully, and proven powders like H4350, IMR4350, and RL16 have long been favorites for working up a load.
Field-Proven on Deer and Elk
The 130 grain .270 load is a classic for a reason, and the copper TSX extends that reputation. Hunters have taken everything from whitetails to bull elk with this bullet, leaning on its deep penetration and reliable expansion. If you want a clean-killing, lead-free projectile that shoots tight and drops game with authority, this one has earned its spot in a lot of reloading benches.
Key Specifications
- Manufacturer: Barnes
- Manufacturer Part Number (MPN): 30264
- UPC: 716876277421
- Model: TSX (Triple-Shock X)
- Caliber: .270 Caliber / 6.8mm
- Bullet Diameter: .277 in
- Bullet Weight: 130 grain
- Bullet Type: TSX Boat Tail Hollow Point
- Construction: 100% Copper, Lead-Free
- Sectional Density: 0.242
- Ballistic Coefficient (G1): 0.374
- Cannelure: Yes
- Recommended Usage: Hunting
- Country of Origin: USA
- Quantity: 50 Per Box
What’s Included
- 50 Barnes TSX .277 130 gr boat tail hollow point reloading bullets (component projectiles, not loaded ammunition)
Frequently Asked Questions
Are these Barnes TSX .270 bullets loaded ammunition?
No, these are component projectiles for handloading, not complete cartridges. You'll need your own brass, primers, and powder to build finished rounds. They're meant for reloaders putting together their own .270 Winchester loads.
What twist rate do I need to stabilize the 130 gr TSX in .277?
A standard 1:10 twist barrel, which is what most .270 Winchester rifles come with, stabilizes this 130 grain bullet just fine. The heavier .277 bullets like the 150 grain are the ones that call for a faster twist. For this 130 grain, your factory .270 Win barrel has you covered.
How deep should I seat the Barnes TSX for best accuracy?
Barnes suggests starting around .050 inches off the lands, then experimenting between .030 and .070 inches to find what your rifle likes best. Because copper bullets run a bit longer than lead-core equivalents, keep an eye on overall length and magazine fit. A little load development goes a long way with these.
Is the 130 grain .270 TSX enough bullet for elk?
Plenty of hunters have cleanly taken elk with the 130 grain TSX out of a .270 Winchester. The all-copper construction and near-total weight retention give it the deep penetration you want on larger game. As always, good shot placement matters more than raw bullet weight.



Reviews
There are no reviews yet.