Description
The Barnes TTSX 6mm (.243) 80gr Tipped Boat Tail is a component bullet built for handloaders who want copper performance out of their .243-based rounds. It runs a solid copper body with the familiar relief grooves cut into the shank, topped with a polymer tip and shaped with a boat tail. That combination gives you a bullet that holds together on tough shots while still opening fast where it counts.
What Sets the TTSX 6mm Apart
The polymer tip does two jobs here. It smooths out the nose profile to raise the ballistic coefficient (rated at .331 G1), which helps the bullet carry velocity and shoot flatter downrange. On impact, that same tip drives back into the hollow nose cavity to kick off expansion right away. When it opens, the TTSX peels into four cutting petals that reach roughly double the original diameter, and because it's all copper, it tends to retain nearly all of its weight for deep, straight-line penetration.
Handloading the Barnes 80gr Tipped Boat Tail
These are 100 percent copper and lead-free, with a sectional density of .194 and an overall bullet length of about 1.081 inches. Keep in mind copper bullets are a touch longer than lead-core bullets of the same weight, so pay attention to your seating depth and work up loads carefully. Barnes recommends starting a bit off the lands and adjusting from there, and the relief grooves help reduce fouling and pressure compared to older solid designs. The 80-grain weight is a sweet spot for 6mm cartridges like the .243 Winchester and 6mm Remington.
For medium game in the 50 to 300 pound range, this is a dependable pick. Hunters chasing whitetail, antelope, and hogs lean on this bullet for its ability to punch through shoulders and still leave the far side, which is exactly what you want when the shot isn't perfect. Load up a box and you've got a reliable copper option that pairs accuracy with knockdown.
Key Specifications
- Manufacturer: Barnes
- Model: Tipped TSX (TTSX)
- Manufacturer Part Number: 30208
- UPC: 716876243389
- Caliber: 6mm
- Bullet Diameter: .243"
- Bullet Weight: 80 Grain
- Bullet Style: Polymer Tip Spitzer Boat Tail
- Core Material: Copper Solid (Lead Free)
- Ballistic Coefficient: .331 (G1)
- Sectional Density: .194
- Bullet Length: 1.081"
- Cannelure: No
- Recommended Usage: Hunting
- Quantity: 50 Per Box
What’s Included
- 50 Barnes TTSX 6mm (.243) 80gr Tipped Boat Tail bullets
Frequently Asked Questions
Are the Barnes TTSX 6mm 80gr bullets loaded ammunition or components?
These are component bullets for handloading, not loaded ammunition. You'll need your own brass, powder, and primers to build finished cartridges. They're designed for reloaders putting together 6mm rounds like the .243 Winchester or 6mm Remington.
What game is the 80gr TTSX a good fit for?
This bullet is built for medium game roughly in the 50 to 300 pound range. Hunters commonly use it on whitetail deer, antelope, and hogs. The all-copper construction and near-total weight retention help it drive through bone and still exit the far side.
Do these Barnes Tipped Boat Tail bullets have a cannelure?
No, the 80gr 6mm TTSX does not have a cannelure. Seat them to the depth your rifle shoots best and rely on proper neck tension to hold the bullet. Starting slightly off the lands and working up is a solid approach with Barnes copper bullets.
Is the TTSX a lead-free bullet?
Yes, the TTSX is 100 percent copper with no lead core. That means it holds together on impact and retains close to all of its weight for deep penetration. It's a great choice for anyone who wants or needs a non-lead hunting projectile.




Reviews
There are no reviews yet.