Description
Barnes built the Match Burner line to give competitive and precision handloaders a lead core match bullet that shoots tight without emptying the wallet. This 6mm (.243) 105 grain boat tail sits right in the sweet spot for 6mm Creedmoor, .243 Winchester, 6XC and similar cartridges, and the long boat tail paired with a 0.511 G1 ballistic coefficient helps it buck wind and hold velocity way out past where most varmint bullets fall apart.
What Sets the 6mm 105 gr Match Burner Apart
The jacketed lead core construction and tight manufacturing tolerances are where this bullet earns its keep. Reloaders consistently point out how uniform the tips run box to box, which means you can load straight off the tray without weighing and sorting every projectile. That kind of consistency shows up on paper and steel, and it is exactly what you want when load development time is at a premium. With a 0.254 sectional density and a measured length of 1.199 inches, it behaves predictably through the press and seats repeatably.
Dialing In Your Barnes Match Burner Load
Barnes recommends a 1:9 twist or faster to stabilize the 105 grain pill, so check your barrel before you build a batch. These run great in the popular 7.5 and 8 twist 6mm competition barrels folks are shooting in Precision Rifle, 3-Gun and High Power matches. Keep in mind this is a component bullet and not loaded ammunition, so you will be supplying your own brass, powder and primers to finish the round.
The 500 count box is the smart buy for anyone shooting these in volume. Between load workups, practice sessions and match days, a 6mm competition rifle eats through bullets fast, and having a full box on the bench means fewer reorders and more trigger time. For anyone chasing repeatable long range accuracy on a realistic budget, the Match Burner is a straightforward pick.
Key Specifications
- Manufacturer: Barnes
- Manufacturer Part Number (MPN): 31120
- UPC: 716876243266
- Caliber: 6mm (.243)
- Bullet Diameter: 0.243 in
- Bullet Weight: 105 grain
- Bullet Style: Boat Tail (BT) Match
- Core Material: Lead
- Ballistic Coefficient (G1): 0.511
- Sectional Density: 0.254
- Overall Length: 1.199 in
- Recommended Twist Rate: 1:9" or Faster
- Quantity: 500 per box
- Country of Origin: USA
What’s Included
- 500 Barnes Match Burner 6mm (.243) 105 grain boat tail match bullets
Frequently Asked Questions
Are the Barnes Match Burners 6mm loaded ammunition or just bullets?
These are component bullets only, not loaded ammunition. You will need to supply your own brass, powder and primers to assemble finished rounds. They are intended for handloaders building their own match or practice loads.
What twist rate do I need to stabilize the 105 grain Match Burner?
Barnes recommends a 1:9 twist or faster to properly stabilize this 105 grain bullet. The faster 7.5 and 8 twist barrels common on 6mm competition rifles handle it very well. If you are unsure of your barrel twist, check your rifle's specs before loading a full batch.
What cartridges work with the Barnes 6mm 105 gr Match Burner?
Any cartridge that uses a 0.243 inch diameter 6mm bullet will work, including 6mm Creedmoor, .243 Winchester, 6XC and 6mm Dasher among others. The 105 grain weight and high BC make it especially popular with 6mm Creedmoor and 8 twist .243 shooters. Always work up your load safely using published reloading data.
Do I need to sort these bullets before loading?
Many reloaders report the tips run uniform enough to load straight from the box without sorting. The consistent construction is one of the reasons this bullet has a reputation for easy accuracy. If you are chasing the absolute last bit of precision for long range match work, you can always sort by weight, but most find it unnecessary.




Reviews
There are no reviews yet.