Description
The Barnes TAC-TX BT in 22 ARC is a lead-free, all-copper projectile Barnes engineered specifically around the 22 ARC cartridge and the velocity range it lives in. Copper construction means these bullets hold together through impact, giving you the kind of weight retention and deep, straight penetration that lead-core designs struggle to match. This is a reloading component, not loaded ammo, so you'll be seating these into your own brass with your preferred powder charge.
What Sets the TAC-TX BT 22 ARC Apart
Barnes added a larger polymer tip to this design, which lets more fluid into the nose on impact and helps kick off reliable expansion even when velocities drop off in shorter barrels. The internal cavity was reworked to open up consistently at those lower speeds, so you get dependable terminal behavior whether you're running a full-length barrel or a carbine. The polymer tip also bumps up the ballistic coefficient compared to an open-tip copper bullet, which helps it hold its line downrange. G1 BC runs 0.432 and G7 comes in at 0.211, with a sectional density of 0.199.
Loading the 70 gr TAC-TX in Your 22 ARC
This bullet measures .224 in diameter with an overall length of 1.172 inches and a fairly long .702 nose, so it's purpose-built for the 22 ARC rather than a drop-in for a 223 Rem magazine. You'll want a 1:7 twist barrel, or faster, to properly stabilize it, which lines up nicely with the standard 22 ARC twist rate. Barnes positioned the cannelure correctly for a clean crimp, so finishing your rounds is straightforward.
Barnes TAC-TX BT 22 ARC in the Field
The all-copper build and tough construction make this a solid pick for medium game and situations where penetration through light barriers matters. Between the barrier performance, high weight retention, and the accuracy Barnes copper bullets are known for, these give handloaders a serious option for getting the most out of their 22 ARC rifle.
Key Specifications
- Manufacturer: Barnes
- Manufacturer Part Number: 32469
- UPC: 716876224623
- Caliber: 22 ARC
- Bullet Diameter: .224 in
- Bullet Weight: 70 gr
- Bullet Type: TAC-TX Boat Tail
- Bullet Material: All-Copper (Lead-Free)
- G1 Ballistic Coefficient: 0.432
- G7 Ballistic Coefficient: 0.211
- Sectional Density: 0.199
- Minimum Twist Rate: 1:7
- Bullet Length: 1.172 in
- Nose Length: .702 in
- Quantity: 50 per box
What’s Included
- 50 Barnes TAC-TX BT 22 ARC 70 gr all-copper boat tail reloading bullets
Frequently Asked Questions
Are these Barnes TAC-TX 22 ARC bullets loaded ammunition?
No, these are reloading components, meaning bare projectiles only. You'll need to seat them into your own brass with your chosen primer and powder charge. They cannot be fired as-is.
What twist rate do I need to stabilize the 70 gr TAC-TX in 22 ARC?
Barnes lists a minimum twist of 1:7 to properly stabilize this sleek 70 grain copper bullet. That matches the standard 1:7 twist found on most 22 ARC rifles, so you're in good shape with a factory 22 ARC barrel. A faster twist will also work fine.
Can I load the TAC-TX BT 22 ARC in a 223 Remington?
This bullet was designed and optimized specifically around the 22 ARC and its velocity range. Its nose length of .702 inches makes it too long to feed reliably from a 223 Rem magazine, so it's best kept to the 22 ARC it was built for.
Why choose an all-copper bullet like the Barnes TAC-TX?
Copper construction gives you excellent weight retention and tends to track straighter through barriers than lead-core designs. The larger polymer tip helps drive reliable expansion even at the lower velocities you see from shorter barrels. It's a clean, tough projectile well suited to medium game.




Reviews
There are no reviews yet.