Description
These Berry's Superior 180 grain flat point projectiles in .401 diameter are a go-to component for anyone loading .40 S&W or 10mm Auto. Each one starts as a swaged lead core, gets copper-plated to its final weight, then runs back through a carbide die to be re-struck to spec. That extra step is why handloaders keep coming back to them: the weight and diameter stay tight from bullet to bullet, which translates to more predictable loads off the press. The flat point profile feeds well in most semi-autos and punches clean, easy-to-score holes in paper.
Why Handloaders Reach For The Berrys 99958
Plated bullets split the difference between plain lead and full jacketed. You get a copper surface that keeps your barrel cleaner and cuts down on the lead fouling and smoke you'd get from bare cast, but without the price tag of true jacketed rounds. That makes the Berrys 99958 a smart pick for high-round-count practice, steel matches, and general range time where you're burning through components fast.
Loading The Berrys .40/10mm Flat Point
Berry's doesn't publish its own load tables, so the standard move is to start with mid-range jacketed or cast data for a same-weight, same-profile bullet and work up. These are rated for velocities up to 1,250 fps, and it pays to stay under that ceiling since pushing plated bullets too hard can separate the plating from the core. SAAMI max overall length runs 1.135 inches for .40 S&W and 1.250 inches for 10mm, with the bullet itself measuring around .596 inches. Since there's no cannelure, flare the case mouth enough to avoid shaving plating on seating, and go light on the crimp. A taper crimp or a very mild roll crimp is all you want; over-crimping cuts through the thin plating and hurts accuracy.
What You're Getting In The Box
This is a 250-count box of component bullets only, not loaded ammunition. You'll supply your own brass, powder, and primers. For a reloader who values repeatable results without jacketed pricing, this box checks the boxes for a daily-driver target and plinking projectile.
Key Specifications
- Manufacturer: Berry's Manufacturing
- Manufacturer Part Number: 99958
- UPC: 711148999582
- Bullet Caliber: .40 Cal / 10mm
- Bullet Diameter: .401"
- Bullet Weight: 180 Grain
- Bullet Type: Flat Point
- Jacket Material: Copper Plated
- Core Material: Lead
- Bullet Overall Length: .596"
- Max Velocity: 1,250 fps
- SAAMI Max COL (.40 S&W): 1.135"
- SAAMI Max COL (10mm): 1.250"
- Quantity: 250 Per Box
What’s Included
- 250 Berry's 99958 180gr .401 flat point copper-plated bullets (component bullets only, not loaded ammunition)
Frequently Asked Questions
What load data should I use for the Berrys 99958 plated bullets?
Berry's doesn't publish dedicated load data for its plated bullets. The common practice is to use published mid-range data for a same-weight, same-profile jacketed or cast bullet and work your load up from there. Keep your velocity under the 1,250 fps rating, since pushing plated bullets too fast can strip the plating from the lead core.
Do these work in both .40 S&W and 10mm Auto?
Yes. At .401 diameter and 180 grains, this bullet is designed for both .40 S&W and 10mm Auto. Just match your cartridge overall length to published data for the caliber you're loading, keeping SAAMI max in mind at 1.135 inches for .40 S&W and 1.250 inches for 10mm.
How should I crimp these since there's no cannelure?
Flare the case mouth enough that you don't shave plating during seating, then apply a light taper crimp or a very mild roll crimp to remove the flare. Over-crimping cuts through the thin plating and can lead to tumbling and lost accuracy. Seat to your manual's recommended overall length for a same-weight bullet.
Are the Berrys 99958 bullets good for indoor range use?
They're a popular choice for indoor ranges because the copper plating encases the lead core and burns cleaner than bare cast bullets, reducing lead fouling and smoke. That makes them a solid pick for high-volume practice and target work.





Reviews
There are no reviews yet.