$143.99
12 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Berry's 30 Caliber 220 grain TMJ Spire Point is a copper-plated .308 diameter projectile built specifically for the .300 AAC Blackout crowd. At 220 grains, this bullet lands squarely in subsonic territory, which is exactly where the Blackout shines when you're running a can. It feeds smoothly through both AR-15 platforms and bolt guns, and the plated construction keeps lead out of your lungs and off your bore compared to bare lead projectiles.
These start life as a swaged lead core, then get electroplated in a copper bath where the longer they soak, the thicker the jacket gets. After plating, each bullet is re-struck to tighten up the dimensions and bond the copper to the core. The result is a total metal jacket that fully encloses the lead, which is a big reason these run so clean at an indoor range or through a suppressor. It's an economical alternative to fully jacketed bullets without the mess of traditional cast lead.
Berry's rates these for a maximum velocity of 1300 fps, so keep your loads subsonic and you'll be in the sweet spot. The recommended cartridge overall length sits around 2.150 inches, with the bullet itself measuring .308 in diameter to drop right into standard 300 BLK chamber specs. Published data is easy to track down in most reloading manuals and powder maker charts, and plenty of folks have had good luck with popular Blackout-specific powders. Always work up your loads and confirm against current data for your components.
For anyone feeding a suppressed .300 Blackout, the heavy 220 grain pill is the classic choice for quiet, consistent subsonic performance. Reloaders who've run these tend to note the uniform appearance and steady weight, which matters when you're chasing repeatable results downrange. Buy them in the 500 count box and you've got a solid stash for range days and load development.
These are built specifically for the .300 AAC Blackout. The heavy 220 grain weight is designed for subsonic loads, which is why they're so popular with suppressed AR-15 and bolt-action builds. They measure .308 in diameter to fit standard 300 BLK chamber specs.
They're Berry's Superior Plated bullets with a total metal jacket. The lead core is electroplated in copper and then re-struck for uniform dimensions, so the plating fully encloses the lead. That keeps your bore and suppressor cleaner and cuts down on lead exposure compared to bare lead projectiles.
Berry's rates these plated bullets for a maximum velocity of 1300 fps. Staying at or below that keeps your loads in the subsonic range the 220 grain weight is designed for. Always start low and work up using current published data for your powder and components.
The spire point profile feeds well in both AR-15 platform rifles and bolt-action guns chambered in .300 Blackout. Reloaders typically report reliable cycling through suppressed AR pistols and rifles. As always, confirm your overall length works with your magazine and chamber.
| UPC | 711148101008 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 10100 |
| Caliber/Gauge | .30 Caliber |
| Grains | 220 |
| Quantity | 500 |
| Shipping Weight | 16.0 |
You must be logged in to post a review.
Reviews
There are no reviews yet.