Description
Berger built the 175 grain OTM Tactical around a simple idea: give serious reloaders a .30 caliber projectile that shoots like a match bullet but holds up to the handling and feeding demands of tactical use. The Open Tip Match hollow point profile keeps the nose uniform for consistent flight, while a tangent ogive makes these forgiving to tune and easy to find a load for. You get a 0.308 inch diameter bullet with a 0.512 G1 and 0.263 G7 ballistic coefficient, numbers that keep it flying flat and bucking wind well into long range.
What Sets the 175 gr OTM Tactical Apart
The backbone here is Berger's J4 Precision jacket, held to extremely tight tolerances with a Total Indicated Runout of roughly plus or minus .0001 inches. That kind of concentricity is what cuts down on dispersion and flyers, so your groups stay honest shot after shot. The boat tail base trims drag and helps the bullet stay stable as it transitions through the transonic zone, which is exactly where lesser designs start to wobble. For tactical duty, Berger uses a thicker, hardened version of that jacket so the bullet can take more handling stress than a benchrest-only projectile.
Loading the Berger OTM Tactical .30 Cal
These are a favorite for bolt action precision rifles and work just as well in AR-pattern and other gas-gun platforms where magazine feeding matters. The overall length runs about 1.261 inches, and Berger recommends a 1:13 inch twist or faster to keep them stabilized. The tangent ogive gives you a little more wiggle room on seating depth during load development, which is a nice break if you have chased lands with pickier VLD designs.
Bottom line, this is a proven .308 diameter match bullet with a tactical build. If you are working up loads for a 308 Winchester or similar .30 caliber case and want accuracy you can repeat, these earn their reputation. Keep in mind these are component bullets only, not loaded ammunition.
Key Specifications
- Manufacturer: Berger Bullets
- Manufacturer Part Number: 30795
- UPC: 679459307956
- Caliber: .30 Caliber
- Bullet Diameter: 0.308 inch
- Bullet Weight: 175 Grain
- Product Line: OTM Tactical
- Bullet Style: Open Tip Match, Boat Tail
- Ogive Style: Tangent
- Jacket: J4 Target Jacket
- G1 Ballistic Coefficient: 0.512
- G7 Ballistic Coefficient: 0.263
- Sectional Density: 0.264
- Overall Length: 1.261 inch
- Recommended Twist: 1:13 inch or faster
- Quantity: 500 Count
What’s Included
- 500 Berger .30 Cal 175 gr OTM Tactical bullets (component projectiles only, not loaded ammunition)
Frequently Asked Questions
What twist rate do I need to stabilize the Berger 175 gr OTM Tactical?
Berger lists a minimum twist of 1:13 inch or faster for this 175 grain bullet. Most .308 and .30 caliber precision rifles already run a 1:10 or 1:11.25 twist, so you will be in good shape. If your barrel is slower than 1:13, you may see stability drop off at distance.
Will these OTM Tactical bullets feed reliably in an AR or gas gun?
Yes. The OTM Tactical line was designed with magazine feeding in mind, so it works well in AR-pattern rifles and other gas-gun platforms in addition to bolt action rifles. The controlled nose profile helps them feed smoothly without hanging up.
Are these loaded cartridges or just bullets?
These are component bullets only, not loaded ammunition. They are meant for handloaders building their own .30 caliber precision loads. You will need your own brass, powder, and primers to assemble finished rounds.
How is the OTM Tactical different from Berger's other match bullets?
The OTM Tactical uses an Open Tip Match hollow point profile paired with a tangent ogive, which makes it forgiving on seating depth and easy to tune. Berger also builds it on a thicker, hardened version of the J4 jacket so it stands up to the rougher handling of tactical and duty use better than a pure benchrest bullet.





Reviews
There are no reviews yet.