0
0

Berger VLD Target .22 Cal (.224) 80gr HPBT Bullets 1000ct

UPC: 679459227223

$438.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Berger's 80-grain VLD Target in .224 diameter is one of the flattest-shooting .22 caliber bullets you can feed a fast-twist barrel. The VLD (Very Low Drag) design uses an aggressive secant ogive to slice through the air with minimal drag, which translates to flatter trajectories, less wind drift, and better retained velocity way out past where lighter .22 bullets start to fall apart. With a G1 BC around 0.455 and a G7 around 0.233, this is a projectile built for shooters who care about where the bullet lands at 600, 800, or 1,000 yards.

What Makes the VLD Target Shine

The secant ogive is the heart of this bullet, and it's the same profile that plenty of other makers have tried to copy over the years. Paired with Berger's J4 Target jacket, you get ultra-uniform copper walls that keep dispersion and flyers to a minimum, along with precision cores that take the guesswork out of consistency. The boat tail base helps the bullet stay settled as it transitions through the transonic range, which is exactly where sloppier bullets tend to get squirrelly.

Dialing In Your .224 80gr VLD Load

These really reward a little load development. The VLD ogive tends to be particular about seating depth, so the common approach is to start close to the lands and test from there. A lot of folks find their node within the first few thousandths of jump, while others run them jammed for single-feed work. Because an 80-grainer seated out to its sweet spot often runs past magazine length, most people use these as a single-shot load in an AR or a bolt gun chambered for the job.

Twist Rate and Fit

Stabilizing an 80-grain .224 bullet takes a fast tube. Plan on a 1:8 twist at minimum, with 1:7 or faster being the safe bet for keeping these fully stabilized downrange. Run them in a .223 Rem, 22 Creedmoor, or similar fast-twist .224 chambering and you've got a seriously capable long-range setup. Keep in mind these are components only, not loaded ammunition.

Key Specifications

  • Manufacturer: Berger Bullets
  • Manufacturer Part Number: 22722
  • UPC: 679459227223
  • Caliber: .22 Caliber (.224)
  • Bullet Diameter: 0.224"
  • Bullet Weight: 80 Grains
  • Bullet Style: VLD Target (Secant Ogive, Boat Tail HPBT)
  • Jacket: J4 Target Jacket
  • Ballistic Coefficient (G1): 0.455
  • Ballistic Coefficient (G7): 0.233
  • Sectional Density: 0.228
  • Recommended Twist Rate: 1:8" or faster (1:7" ideal)
  • Quantity: 1000 per box
  • Country of Origin: USA

What’s Included

  • 1000 Berger VLD Target .22 Cal (.224) 80gr HPBT bullets (projectiles/components only, not loaded ammunition)

Frequently Asked Questions

What twist rate do I need to stabilize the Berger 80gr VLD Target?

An 80-grain .224 bullet is long and needs a fast barrel to keep it stable. Plan on a 1:8 twist at a minimum, with 1:7 or faster being the preferred choice for full stabilization out to long range. Running these through a slower twist like a 1:9 will usually leave them under-stabilized.

Can I load the .224 80gr VLD Target in an AR-15 magazine?

In most cases, no. When seated out to their accuracy sweet spot, these 80-grainers typically end up longer than AR magazine length, so they're most commonly used as a single-feed load. If you want something that fits the mag, a lighter Berger like the 70gr or 73gr is the better route.

Is the VLD Target picky about seating depth?

The secant ogive on the VLD can be a bit particular, so it pays to do a seating depth test. A common starting point is close to the lands, often within the first few thousandths of jump, then fine-tuning from there. Every barrel is a little different, so a short test run usually pays off in tighter groups.

Are these loaded cartridges or just bullets?

These are component projectiles only, intended for handloading. The box contains 1000 bullets with no brass, powder, or primers. You'll need your own reloading components and equipment to build finished ammunition.

Additional information

UPC

679459227223

Manufacturer

Manufacturer Part Number

22722

Caliber/Gauge

.22 Caliber

Grains

80

Quantity

1000

Shipping Weight

11.97

Reviews

There are no reviews yet.

Be the first to review “Berger VLD Target .22 Cal (.224) 80gr HPBT Bullets 1000ct”