Description
If you're loading 6.5 PRC and want clean, repeatable bullet seating without a bunch of fuss, this is the die that gets it done. This listing is for the Redding Series B seating die by itself (part number 92487), so it's a great pickup if you already have a sizing die, want to add a second die to a shared press setup, or need a replacement seater for your bench. It handles the final step of the reloading process, pushing the bullet into the case to the depth you dial in.
Redding builds these dies out of high quality alloy that's machined and then hand polished, which is a big part of why they run so smooth and hold up over long loading sessions. The seater includes a bullet guide that keeps things aligned as the bullet enters the case, a built-in crimping ring, and the proper 6.5 PRC seating plug so it's ready to go for the cartridge right out of the box.
What the Series B Seating Die Brings to Your 6.5 PRC Loads
The 6.5 PRC runs a .264 bullet diameter and likes consistency, which is exactly where a good seater earns its keep. Keeping your seating depth uniform from round to round helps tighten up groups and takes some of the guesswork out of chasing the lands with your favorite match bullet. This die gives you that steady, predictable performance whether you're building hunting loads or range ammo.
Press Fit and Setup for the 92487 Die
Like the rest of Redding's lineup, this one uses industry standard 7/8-14 threads, so it'll thread right into most popular single stage and turret presses on the market. The 6.5 PRC uses a #6 shell holder if you need to round out your setup. Setup is straightforward: thread it in, set your seating depth, and you're making ammo.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 92487
- UPC: 611760924873
- Caliber: 6.5 PRC
- Die Type: Bullet Seating Die (Seater Only)
- Series: Series B
- Case Type: Bottleneck
- Bullet Diameter: 0.264 in
- Thread Size: 7/8-14
- Shell Holder: #6
- Pilot Number: 15260
- Construction: Machined alloy, hand polished
- Shipping Weight: 0.53 lb
What’s Included
- Redding Series B seating die for 6.5 PRC
- Bullet guide
- Built-in crimping ring
- Proper 6.5 PRC seating plug
Frequently Asked Questions
Is this the Series B seating die only, or does it come with a sizing die?
This is the seating die by itself, part number 92487. It does not include a sizing die. If you want both the full length sizing die and the seater together, you'd want to look at the Redding Series B two die set for 6.5 PRC instead.
Does the Series B 6.5 PRC seating die have a micrometer adjustment?
No, the standard Series B seater uses a conventional seating plug and does not have the micrometer top. If you want micrometer seating depth calibrated in .001 inch increments, that's the Redding Competition seating die for 6.5 PRC, which is a separate model.
Will this die fit my reloading press?
Yes, it uses the industry standard 7/8-14 thread, so it threads into most popular single stage and turret presses. You'll also want a #6 shell holder for the 6.5 PRC if you don't already have one.
Can this seating die crimp as well as seat?
It has a built-in crimping ring, so it can apply a roll crimp while seating if you set it up that way. Many reloaders prefer to seat and crimp in separate steps for the most consistency, but the option is there in this die.



Reviews
There are no reviews yet.