Description
If you're loading for the 6mm GT, the right seating die makes a real difference in how your ammo comes together, and Redding has this cartridge dialed in. The 92199 is the standard bullet seating die for 6mm GT, machined from quality materials with the polished interior Redding is known for. It uses a built-in bullet guide to support the bullet as it enters the case neck, which helps keep everything in line and your rounds consistent round after round.
The 6mm GT was designed for the precision crowd, and it has earned a reputation for impressive accuracy out of a cartridge that is easy on barrels and comfortable to shoot. This die is built to match that intent. Seating depth is adjusted by threading the seating plug up or down, so you can tune your loads to the bullet and chamber you're working with. There's also a built-in crimp ring if you want a roll crimp, though plenty of precision reloaders back the die off and skip the crimp entirely for match work. Both options are there without having to buy a separate tool.
What Sets the Redding 6mm GT Seater Apart
This is a single seating die with a 7/8"-14 thread, so it drops into any standard reloading press. The seating plug is shaped to match the cartridge, and the whole die is made in the USA like the rest of Redding's lineup. It's the same seater that ships inside Redding's 6mm GT full length and neck die sets, so if you already bought your sizing die separately or want a spare seater on the bench, this covers it.
Getting the Most From Your 6mm GT Reloads
A little setup goes a long way with any seater. Clean and chamfer your case mouths, keep neck tension consistent, and this die will reward you with repeatable seating depth. Pair it with a quality sizing die and good brass, and you've got the makings of accurate 6mm GT ammo for the range or a weekend match. For anyone chasing tighter groups without overcomplicating the bench, this Redding seater is a straightforward, dependable piece of the puzzle.
Key Specifications
- Manufacturer: Redding
- Cartridge: 6mm GT
- Die Type: Standard Bullet Seating Die
- Bullet Diameter: 0.243 in
- Thread Size: 7/8"-14
- Seating Depth Adjustment: Threaded seating plug
- Crimp: Built-in crimp ring (optional roll crimp)
- Bullet Guide: Yes, built-in
- Shellholder: #1 (sold separately)
- Country of Origin: Made in USA
- Manufacturer Part Number: 92199
- UPC: 611760921995
- Shipping Weight: 0.61 lb
What’s Included
- One Redding 6mm GT standard bullet seating die with seating plug
- Die box
- Instructions
Frequently Asked Questions
Is the Redding 6mm GT Seating Die a micrometer die?
No, this is the standard 6mm GT seater (part number 92199), not the micrometer-adjustable Competition model. Seating depth is set by threading the seating plug in or out of the die. If you want micrometer-style adjustment calibrated in .001 inch increments, that's Redding's separate Competition seating die for 6mm GT.
Does this die crimp the bullet?
It can. The seater includes a built-in crimp ring that applies a roll crimp if you adjust the die down toward the shellholder. Most precision reloaders back the die off so the crimp ring stays out of play and the round is seated without a crimp, which is a common choice for match loads.
Will this seating die work with my reloading press?
Yes. It uses the standard 7/8"-14 thread, so it fits any common single stage or progressive press with that thread. You'll also need the correct shellholder, a #1 for 6mm GT, which is sold separately.
Do I need the sizing die too, or does this handle everything?
This is a seating die only, so it seats bullets into brass you've already sized and primed. You'll want a sizing die to resize the case and remove spent primers first. This same seater is what ships inside Redding's 6mm GT die sets, so it pairs naturally with their full length or neck sizing dies.




Reviews
There are no reviews yet.