Description
The Redding Full Length Sizing Die for .350 Legend takes your fired brass and brings it back to where it needs to be, working the entire length of the case from mouth to base so every round chambers clean and feeds smooth. Since the .350 Legend is a straight-walled cartridge, this sizing die carries a decapping rod assembly that knocks out the spent primer while the body of the die handles the resizing. For proper neck tension and bullet fit, the straight-wall workflow uses a separate expander die, so this piece is the first step in getting consistent, reliable ammo off your bench.
What Sets the Redding .350 Legend Sizing Die Apart
Redding has a reputation among handloaders for a reason. These dies are machined on precision lathes from quality alloy steel, then heat treated and hand polished to cut down on sizing effort and keep your brass coming out clean. The internal sizing surfaces carry a hardness around Rc 60 to 62, which is a big part of why these dies hold their tolerances year after year. If you reload in volume or just want your brass prepped the same way every time, that consistency pays off.
Fitting the Redding Full Length Die Into Your Press
This die uses the industry standard 7/8-14 thread, so it threads right into any common single stage or progressive press without any fuss. Pair it with a #10 shellholder and a touch of case lube before you run brass through it. Running cases dry or skimping on lube is the quickest way to get one stuck, so keep a light, even coat on the case body and you will be in good shape.
For folks who load a lot of .350 Legend, the sizing button on this die can be swapped out for a carbide upgrade sold separately, which smooths out the stroke and cuts down on case stretch over time. Whether you are stocking up for deer season or just enjoy building your own loads, this is a die you can count on to do the job right and keep doing it for a long, long time.
Key Specifications
- Manufacturer: Redding
- Caliber: .350 Legend
- Die Type: Full Length Sizing Die (Series A)
- Manufacturer Part Number: 91791
- UPC: 611760917912
- Thread Size: 7/8-14
- Material: Heat-Treated Alloy Steel
- Internal Surface Hardness: Rc 60-62
- Shellholder: #10 (sold separately)
- Includes: Decapping Rod Assembly
- Shipping Weight: 0.57 lb
What’s Included
- Redding Full Length Sizing Die for .350 Legend
- Decapping rod assembly
Frequently Asked Questions
Does the Redding .350 Legend sizing die include a neck expander?
No. Because .350 Legend is a straight-walled cartridge, it cannot be full length sized and have the neck expanded for proper bullet fit in one operation. This die contains a decapping rod assembly, while a separate expander die handles opening the case mouth for seating. If you want both steps covered, look at the full three-die set for .350 Legend.
Will this die fit my reloading press?
Yes. The die uses the standard 7/8-14 thread found on nearly every single stage and progressive press on the market, so it threads right in. You will also want the correct #10 shellholder, which is sold separately.
Do I need to lube my cases before sizing?
Yes, case lube is a must with a steel full length sizing die like this one. A light, even coat on the case body keeps the stroke smooth and prevents cases from getting stuck in the die. Running brass dry is the most common cause of a stuck case, so do not skip this step.
Can I upgrade the sizing button on this Redding die?
You can. Redding offers a carbide size button kit sold separately that drops into most of their full length dies. It makes inside neck sizing smoother, reduces case stretch, and lets you size without lubing the inside of the neck.




Reviews
There are no reviews yet.