Description
The Redding Series B Full Length Sizing Die handles one of the most important steps on any reloading bench: getting your 6.5 PRC brass back to proper dimensions so it chambers right in any standard rifle. This is the full length sizing die only, part number 91487, so it drops neatly into your existing setup if you already seat with another die or you're building a bench one piece at a time. It sizes the entire case, body and neck included, and bumps the shoulder back when you need it, all in a single stroke of the press.
What the 6.5 PRC Series B Sizing Die Does on the Bench
Inside the die you get a decapping rod assembly with a neck expander button that knocks out the spent primer and sets your inside neck diameter on the same pass. Redding sizes this die to bring cases back to SAAMI specs, which is exactly what you want for brass that feeds and chambers without a fight. If you've ever fought with inconsistent neck tension or cases that stick on the way in, a quality full length die is where a lot of that gets sorted out.
Build Quality Behind the Redding 91487
Redding machines these dies from quality alloy steel and heat treats them for a long service life, then hand polishes the internals for smooth operation. The body uses the industry standard 7/8-14 threads, so it threads straight into any standard single stage or progressive press without adapters or fuss. The Series B designation simply covers cartridges that are a touch less common than the Series A lineup, and the 6.5 PRC fits right in there as a popular long range and hunting round.
If you're loading 6.5 PRC for precision work or filling the freezer, this die gives you repeatable, consistent sizing you can lean on load after load. Pair it with a matching seating die and the right shellholder, number 6 for this cartridge, and you've got the core of a solid 6.5 PRC reloading setup.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 91487
- UPC: 611760914874
- Caliber: 6.5 PRC
- Die Type: Full Length Sizing Die
- Series: Series B
- Cartridge Style: Bottleneck
- Thread Size: 7/8-14
- Material: Alloy Steel
- Overall Length: 5.25 in
- Recommended Shellholder: #6
- Weight: 0.54 lbs
What’s Included
- Full length sizing die
- Decapping rod assembly with neck expander button
- Spare decapping pin
- Hex wrench
- Die storage box
Frequently Asked Questions
Is this just the sizing die or a full die set?
This listing is for the full length sizing die only, part number 91487. It does not include a seating die. If you need the complete setup, you'll want to add a matching seating die or step up to one of Redding's 6.5 PRC die sets.
Does the Redding 91487 size the neck too, or just the body?
It's a full length die, so it sizes the entire case including the body and the neck in one stroke. The included decapping rod has a neck expander button that sets your inside neck diameter and knocks out the spent primer at the same time.
Will this die fit my press?
Yes. It uses the industry standard 7/8-14 threaded body, which fits any standard single stage or progressive reloading press. No adapters needed.
What shellholder do I need with this 6.5 PRC die?
The 6.5 PRC uses a number 6 shellholder on Redding's chart. The shellholder is not included with the die, so grab one separately if you don't already have it in your kit.





Reviews
There are no reviews yet.