0
0

Redding Carbide Pro Series 3-Die Set .45 ACP (89189)

UPC: 611760891892

$127.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're running a progressive press and loading .45 ACP in volume, the Redding Carbide Pro Series 3-Die Set is purpose-built for that job. These dies are set up for the way progressive machines actually work, with a large radius machined at the mouth of each die so cases feed in smoothly station to station. The sizing die uses Redding's NxGEN titanium carbide, which is about as hard and slick a surface as you'll find in a pistol die, meaning your brass slides through without any case lube.

What Comes in the Redding Pro Series .45 ACP Set

This is a three-die set that skips the traditional expander die on purpose. Most popular progressive presses expand the case mouth right at the powder drop station, so including a standalone expander would be redundant. Instead you get the carbide sizing and decapping die, a dedicated seating die built for seating only with no crimp function, and a separate crimp die. Because .45 ACP headspaces on the case mouth, the set ships with a taper crimp die, which is exactly what you want for keeping that headspace dimension correct while still locking the bullet in place.

Why the Separate Crimp Die Matters

Separating seating and crimping into two steps is where this set earns its keep. Crimping in a dedicated operation after the bullet is seated gives you a cleaner, more uniform result than trying to do both at once, which helps with feeding and consistency round after round. For target loads, bulk range ammo, or match-grade .45, that extra bit of control adds up over a few thousand rounds.

Running It on a Single Stage

While the Pro Series was designed for progressive machines, the set works just fine on a single stage press too. You'll just want to pick up an expander die separately since one isn't included here. A shell holder is also sold separately. The .45 ACP uses the #1 shell holder if you need to grab one. Everything is made in the USA, which is the standard you'd expect from Redding.

Key Specifications

  • Caliber: .45 ACP
  • Set Type: Pro Series Carbide 3-Die Set
  • Number of Dies: 3
  • Sizing Die: NxGEN Titanium Carbide with decapping unit
  • Seating Die: Dedicated seating only, no crimp function
  • Crimp Die: Taper crimp die (headspaces on case mouth)
  • Expander Die: Not included
  • Case Lube Required: No
  • Designed For: Progressive presses, also works on single stage
  • Shell Holder: #1 (sold separately)
  • Country of Origin: USA
  • Manufacturer: Redding
  • Manufacturer Part Number: 89189
  • UPC: 611760891892
  • Shipping Weight: 1.5 lbs

What’s Included

  • NxGEN titanium carbide sizing and decapping die
  • Dedicated bullet seating die (no crimp function)
  • Taper crimp die

Frequently Asked Questions

Does the Redding Pro Series .45 ACP set include an expander die?

No, it does not. The expander is left out on purpose because most popular progressive presses expand the case mouth at the powder drop station. If you plan to run these dies on a single stage press, you'll want to buy an expander die separately.

Do I need case lube with these carbide dies?

No lube needed. The sizing die uses Redding's NxGEN titanium carbide, which gives a slick, non-galling surface so your cases glide through without any sizing lubricant. That saves you a messy step and speeds up high-volume sessions.

Is this set a taper crimp or roll crimp for .45 ACP?

This set ships with a taper crimp die. Since .45 ACP headspaces on the case mouth, a taper crimp is the right choice because it secures the bullet without altering that critical headspace dimension. Crimping is done as a separate operation after seating for a cleaner, more consistent result.

Can I use the Redding Pro Series set on a single stage press?

Yes. Although it was designed for progressive machines, the set works well on a single stage press. You'll just need to add an expander die since one isn't included, and pick up a #1 shell holder if you don't already have one.

Additional information

UPC

611760891892

Manufacturer

Manufacturer Part Number

89189

Shipping Weight

1.5

Reviews

There are no reviews yet.

Be the first to review “Redding Carbide Pro Series 3-Die Set .45 ACP (89189)”