Description
Redding built the Pro Series line for folks running progressive presses, and the 9mm Luger set is one of the most popular configurations they make. Instead of the standard three-die layout, this set drops the expander die because machines like the Dillon 550, 650, 750, and Hornady LNL already expand the case mouth at the powder drop station. What you get in its place is a cleaner, better-flowing setup tuned specifically for feeding cases on the move.
What Comes in the Pro Series 9mm Set
The set includes three dies: the NxGEN carbide sizing die (NX-C), a PRO ST seating die with a large entry radius, and a separate taper crimp die (CR). The NxGEN carbide uses a single carbide ring that follows the original case profile more closely than older two-ring designs, which means better chamber fit and easier case life. Since the seating die is dedicated to seating only with no crimp function, the standalone crimp die lets you crimp after the bullet is fully seated, which is how you get the cleanest, most consistent handloads.
Why the Pro Series Dies Flow Better on a Progressive
Every die in this set has an oversized bellmouth radius at the base, which makes a real difference when cases are indexing fast and not perfectly aligned. The 7/8-14 threaded bodies are slightly extended for full lock ring engagement, and the exterior polish on these is a noticeable step up from standard dies. Being carbide, the sizing die needs no case lubricant, so you can run clean 9mm brass straight through without the lube-and-wipe hassle.
Running the 9mm Pro Series Set on a Single Stage
While these are purpose-built for progressives, they work just fine on a single stage press if you pick up a Redding expander die separately. Keep in mind the shellholder is sold separately, and 9mm Luger uses the #13 shellholder. Made in the USA, these dies carry Redding's reputation for tight tolerances and long service life.
Key Specifications
- Manufacturer: Redding Reloading
- Caliber: 9mm Luger
- Set Type: Pro Series NxGEN Carbide 3-Die Set
- Manufacturer Part Number: 89172
- UPC: 611760891724
- Sizing Die: NxGEN Carbide (NX-C), no lube required
- Seating Die: PRO ST, large entry radius, no crimp
- Crimp Die: Dedicated taper crimp die (CR)
- Expander Die: Not included (progressive expands at powder station)
- Thread: 7/8-14
- Shellholder: #13 (sold separately)
- Bullet Diameter: 0.355
- Country of Origin: Made in USA
- Shipping Weight: 1.5 lbs
What’s Included
- NxGEN Carbide Sizing/Decapping Die (NX-C)
- PRO ST Bullet Seating Die with large entry radius (no crimp)
- Taper Crimp Die (CR)
- Spare decapping pin
- Plastic storage case
Frequently Asked Questions
Does the Redding Pro Series 9mm set include an expander die?
No, the expander die is intentionally left out. Pro Series sets are built for progressive presses like the Dillon 550, 650, and 750, which expand the case mouth at the powder drop station. If you plan to run these on a single stage press, you'll want to pick up a Redding expander die separately.
Do I need to lube my 9mm brass with these carbide dies?
No lube is needed thanks to the carbide sizing die. That's one of the big reasons these are so handy for high-volume handgun loading. Some folks still add a touch of lube just to make cases glide even smoother, but it's not required for 9mm.
Is a shellholder included with this die set?
No, the shellholder is sold separately. For 9mm Luger you'll need the #13 shellholder. It's worth grabbing one at the same time if you don't already have it in your kit.
What makes the Pro Series different from a standard Redding 9mm die set?
The Pro Series uses dies with a large radius at the mouth for easy case entry when brass is indexing quickly on a progressive. It swaps the standard expander die for a dedicated crimp die, and the seating die handles seating only. The exterior polish and tighter machining also set these apart from the standard line.




Reviews
There are no reviews yet.