Description
Reloading .45 ACP is one of the most rewarding ways to feed a 1911 or any big-bore .45, and the right dies make the whole process smoother. Redding's titanium carbide 3-die set earns its spot on the bench because the sizing die skips the case lube step entirely. Titanium carbide has the highest hardness of any readily available carbide, and under a microscope its microstructure looks smooth and rounded, which gives you a slippery, non-galling surface made for lubeless resizing. That means less prep, less cleanup, and more time running the press.
What You Get in the Redding .45 ACP Carbide Set
This is a conventional three-die setup covering every step of straight-wall pistol loading. You get the titanium carbide sizing and decapping die, an expander die to bell the case mouth for seating, and a bullet seating die. Because .45 ACP headspaces on the case mouth, the seating die is set up for a taper crimp, which is exactly what you want for reliable feeding in semi-autos. Everything uses the standard 7/8"-14 thread, so it threads right into common presses without any fuss.
Running the Redding Titanium Carbide Dies
This set is built for single stage or turret presses, and it also handles the .45 Auto Rim case along with .45 ACP. Reloaders consistently praise the fit and finish, noting that the machining inside and out is about as clean as it gets and that setup and adjustment are straightforward. Made in the USA, these dies are the kind of tooling you buy once and pass down.
One thing to note before you load up: the shellholder is sold separately, so grab the correct one for .45 ACP if you don't already have it on hand. Pair these dies with your press, your components, and good load data, and you'll be turning out accurate, repeatable .45 ammo that feeds clean.
Key Specifications
- Caliber: .45 ACP / .45 Auto Rim
- Die Set Type: Conventional 3-Die Set
- Sizing Die Material: Titanium Carbide
- Crimp Type: Taper Crimp (case-mouth headspacing)
- Thread Size: 7/8"-14 Standard
- Press Compatibility: Single Stage or Turret Presses
- Lube Required: No (lube-free sizing)
- Country of Origin: USA
- Manufacturer: Redding
- Manufacturer Part Number (MPN): 88189
- UPC: 611760881893
- Shipping Weight: 1.6375 lbs
What’s Included
- Titanium Carbide Sizing/Decapping Die
- Expander (case mouth flare) Die
- Bullet Seating Die with Taper Crimp
Frequently Asked Questions
Do I need case lube with the Redding Titanium Carbide .45 ACP dies?
No, the titanium carbide sizing die is designed for lube-free resizing of your .45 ACP brass. The carbide insert has a smooth, non-galling surface that lets cases slide through without lubricant. That saves you the lube-and-clean step and keeps your bench a lot tidier.
Does this set come with a shellholder?
No, the shellholder is sold separately. You'll want the correct shellholder sized for the .45 ACP case head before you start loading. If you've reloaded .45 before you likely already have the right one on hand.
Will the Redding carbide die set work in my progressive press?
Redding lists this set for single stage or turret presses. The dies use the standard 7/8"-14 thread, which is the common sizing used across most presses. Many reloaders do run Redding dies in progressive setups, so check your press station spacing and threading to confirm the fit.
Why does the seating die use a taper crimp instead of a roll crimp?
Because .45 ACP headspaces on the case mouth, a taper crimp is the correct choice. It removes the case mouth bell and secures the bullet without biting into the case, which keeps your rounds chambering and feeding reliably in semi-autos. A roll crimp would interfere with proper headspacing on this cartridge.



Reviews
There are no reviews yet.