Description
If you reload 9mm Luger, this is the die that handles one of the most important steps in building reliable semi-auto ammo. The 9mm headspaces on the case mouth, so a roll crimp is a bad idea here. A taper crimp is the right call, and Redding's dedicated 85172 die does exactly that by gently closing the case mouth back down after bullet seating without biting into the brass.
The taper crimp works by squeezing the case mouth tighter and tighter as the case moves up into the die. That gradual approach holds the bullet firmly without deforming the brass or messing with your overall cartridge length, which keeps your rounds feeding smoothly through magazines and chambers. It doesn't work the case mouth as hard as a roll crimp, so your brass lasts longer too.
What the Redding 85172 Brings to Your Bench
This is a single, caliber-specific die built from hardened steel and machined to tight tolerances, which is the kind of consistency Redding has built its name on. It uses the standard 7/8"-14 thread, so it drops right into single-stage, turret, and progressive presses from Dillon, RCBS, Hornady, Lee, and others. Reloaders running it on setups like the Dillon 550 report it being straightforward to dial in and easy to keep clean.
Setting Up the Redding Taper Crimp Die
Setup is simple: thread the die in, run a seated round up, and adjust in small increments until you get the crimp measurement you're after. Since this is a crimp-only die, you don't need case lube for this step. A quick pass with a cleaning patch and some rubbing alcohol is all it takes to keep the inside spotless. Whether you're loading target rounds, competition ammo, or practice fodder, a dedicated taper crimp die gives you more control and better round-to-round consistency than relying on a seat-and-crimp combo.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 85172
- UPC: 611760851728
- Caliber: 9mm Luger (9×19)
- Die Type: Taper Crimp Die
- Pack Size: Single Die
- Case Design: Straight Wall
- Material: Steel
- Thread: 7/8"-14 Standard
- Press Compatibility: Single-stage, turret, and progressive presses
- Country of Origin: United States
- Shipping Weight: 0.425 lbs
What’s Included
- Redding 9mm Luger Taper Crimp Die (85172)
- Lock ring
Frequently Asked Questions
Why use a taper crimp instead of a roll crimp on 9mm Luger?
The 9mm Luger headspaces on the case mouth, so a roll crimp can interfere with proper headspacing and chambering. A taper crimp gently closes the case mouth back down to grip the bullet without rolling the brass inward. This keeps your rounds feeding and chambering reliably in semi-auto pistols.
Will the Redding Taper Crimp Die fit my press?
Yes. The 85172 uses the standard 7/8"-14 thread, which is the industry standard for reloading dies. That means it threads right into single-stage, turret, and progressive presses from Dillon, RCBS, Hornady, Lee, and others.
Do I need case lube when using this crimp die?
No. Case lube is not required for a crimp-only operation like this. To keep the die clean, just run a patch with a little rubbing alcohol or a bore snake through it now and then.
Is this the micrometer adjustable version?
No, the 85172 is Redding's standard taper crimp die, adjusted by threading the die body and setting the lock ring. If you want top-end micrometer adjustment, Redding offers a separate Micrometer Adjustable Crimping Die for the 38 Super/9mm family. This standard die covers what most reloaders need for consistent 9mm crimps.





Reviews
There are no reviews yet.