0
0

Redding Neck Die Set for 6.5mm GAP 4S (82845) Bottleneck 2-Die

UPC: 611760828454

$80.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Redding Neck Die Set in 6.5mm GAP 4S is a focused two-die package aimed at the handloader who wants to wring the most consistency out of fire-formed brass for one rifle. Instead of working the entire case body, the neck sizing die only resizes the neck, which keeps brass closely matched to your chamber and tends to stretch out case life. For a short, fat capacity-heavy cartridge like the 6.5 GAP 4S (also known as the 6.5 SAUM), that kind of control over the neck is exactly what the precision crowd is after.

What You Get in the 6.5mm GAP 4S Neck Die Set

This set pairs a neck sizing die with a conventional bullet seating die. The neck die comes assembled with a decapping rod and neck sizing button, so it deprimes and resizes the neck in one stroke. The seating die includes a bullet guide, a built-in crimp ring, and the correct seating plug, so you get clean alignment as the bullet starts into the case mouth. Both dies use the standard 7/8-14 thread, so they drop right into any common single stage or turret press.

Why Redding Dies for the 6.5 GAP 4S

Redding machines their dies on precision lathes and heat treats them in atmospherically controlled furnaces, which is a big part of why they hold such tight tolerances and last a lifetime of loading. The 6.5 GAP 4S runs at relatively mild pressures for its case capacity, so brass tends to last a long while already, and neck-only sizing helps keep that brass performing round after round. One thing worth knowing: cases that have only been neck sized may not drop freely into a different rifle chambered for the same cartridge, so this approach shines when you are dedicating your brass to one gun.

If you ever want to fine-tune neck tension down the road, Redding offers carbide size button kits and bullet seating micrometers separately to tailor this set to your load.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 82845
  • UPC: 611760828454
  • Cartridge: 6.5mm GAP 4S (6.5 SAUM)
  • Die Set Type: Neck Die Set (2-Die)
  • Case Type: Bottleneck
  • Dies Included: Neck Sizing Die, Bullet Seating Die
  • Thread Size: 7/8-14
  • Material: Heat-treated steel
  • Shipping Weight: 1.19 lbs

What’s Included

  • Neck sizing die with decapping rod assembly and neck sizing button
  • Conventional bullet seating die with bullet guide, built-in crimp ring, and seating plug
  • Instruction literature

Frequently Asked Questions

What is the difference between neck sizing and full length sizing with this Redding set?

This set only resizes the neck of the case rather than the full body, which keeps your brass fitted closely to your chamber and typically extends case life. That works great for a dedicated rifle, but keep in mind brass that has only been neck sized may not chamber in a different gun of the same caliber. If you plan to shoot the same brass across multiple rifles, a full length set is the better tool.

What dies come in the Redding Neck Die Set for 6.5mm GAP 4S?

You get two dies: a neck sizing die and a conventional bullet seating die. The neck die includes a decapping rod and neck sizing button so it deprimes and sizes the neck in one pass, and the seating die has a bullet guide, built-in crimp ring, and the proper seating plug.

Will these dies fit a standard reloading press?

Yes. Both dies use the industry standard 7/8-14 thread, so they thread into virtually any common single stage, turret, or progressive press that accepts standard dies.

Is the 6.5mm GAP 4S the same as the 6.5 SAUM?

The 6.5 GAP 4S is a version of the 6.5 SAUM optimized to feed from short action magazines with its freebore and case dimensions tuned for popular long-range bullets. These dies are cut specifically for the GAP 4S chamber spec, so they match brass headstamped and formed for that cartridge.

Additional information

UPC

611760828454

Manufacturer

Manufacturer Part Number

82845

Shipping Weight

1.19

Reviews

There are no reviews yet.

Be the first to review “Redding Neck Die Set for 6.5mm GAP 4S (82845) Bottleneck 2-Die”