0
0

Redding Full Length 2-Die Set 6.5mm GAP 4S | Standard Rifle Dies

UPC: 611760808456

$117.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Redding has been turning out dies since 1946, and this standard full-length set for the 6.5mm GAP 4S carries that same reputation for consistency. It's a straightforward two-die package built for folks loading bottleneck cases, whether you're chasing tight groups at the range or putting together hunting rounds you can trust. No bushings to fuss with, no micrometer dial, just clean sizing and seating that gets the job done.

What the 6.5 GAP 4S Die Set Actually Does

The full-length resizing die carries a decapping rod assembly with a neck expander, often called the size button. It works the case body, shoulder, and neck so your brass comes back to minimum SAAMI dimensions and chambers smoothly in any standard rifle. The expander rod helps even out neck tension even when case wall thickness varies a little from piece to piece, which goes a long way toward consistent bullet pull.

Inside the Redding Full Length Set

The seating die includes a bullet guide, a built-in crimp ring, and the proper seating plug for the 6.5 GAP 4S. The bullet guide helps start your projectile straight, and if your load calls for a crimp, the die can be adjusted to apply one. Since there's no micrometer on the seater, this set suits handloaders who tend to run one go-to bullet rather than swapping profiles constantly.

Everything about these dies reflects Redding's build quality. They're machined from fine alloy steel on super-precision lathes, heat treated in controlled furnaces, then hand polished for smooth operation and ultrasonically cleaned before packing. The die box doubles as a cartridge loading block and storage case, and tucked inside you'll find a spare decapping pin, a hex wrench, and a spot to stash your shell holder. The dies use the industry standard 7/8-14 threaded bodies, so they'll thread right into your press. Keep in mind the shell holder is sold separately.

Key Specifications

  • Manufacturer: Redding
  • Caliber: 6.5mm GAP 4S
  • Set Type: Full Length 2-Die Set (Standard)
  • Case Type: Bottleneck
  • Dies Included: Full Length Resizing Die, Seating Die
  • Thread Size: 7/8-14
  • Seater Adjustment: Standard (non-micrometer)
  • Sizes Case To: Minimum SAAMI Dimensions
  • Manufacturer Part Number: 80845
  • UPC: 611760808456
  • Shipping Weight: 1.19 lbs

What’s Included

  • Full length (FL) resizing die with decapping rod assembly and neck expander (size button)
  • Seating (ST) die with bullet guide, built-in crimp ring, and proper seating plug
  • Spare decapping pin
  • Hex wrench
  • Die box with cartridge loading block and storage
  • Instructions

Frequently Asked Questions

Does the Redding 6.5 GAP 4S die set come with a shell holder?

No, the shell holder is sold separately with this set. Redding leaves it out since many reloaders already have the right one on hand or want to match a specific brand of press. The die box does include a dedicated spot to store your shell holder once you pick it up.

Is this a bushing or Type-S die set?

This is Redding's standard full-length set, not a Type-S bushing set. The resizing die uses a neck expander button rather than interchangeable bushings to set neck tension. If you want bushing-style neck control, Redding offers a separate Type-S version for the 6.5 GAP 4S.

Can I crimp with the seating die in this set?

Yes, the seating die has a built-in crimp ring and can be adjusted to apply a crimp if your load calls for one. You can also run it without crimping and just seat the bullet. It's a conventional seater without a micrometer, so it works best if you stick to one bullet for your load.

Will these dies fit my press?

They use the industry standard 7/8-14 threaded bodies, so they'll thread into virtually any standard single stage or turret press. That's the same threading used across most reloading equipment. Just add the correct shell holder and you're ready to load.

Additional information

UPC

611760808456

Manufacturer

Manufacturer Part Number

80845

Shipping Weight

1.19

Reviews

There are no reviews yet.

Be the first to review “Redding Full Length 2-Die Set 6.5mm GAP 4S | Standard Rifle Dies”