0
0

Redding 6.5 PRC Full Length 2-Die Set (80487)

UPC: 611760804878

$62.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Redding 6.5 PRC Full Length Die Set is the two-die setup most handloaders reach for when they want reliable, accurate ammo without any fuss. It covers the two jobs that matter most on the press: sizing your fired brass back down so it chambers in any standard rifle, and seating your bullets straight and consistent. For anyone loading 6.5 PRC for hunting or punching paper at distance, this is the foundation set that just works.

What the Redding 6.5 PRC Die Set Does on the Press

The full length sizing die resizes your cases back to SAAMI spec, so loaded rounds drop into any standard chamber regardless of action type. It comes fitted with a decapping rod assembly and a neck expander button that knocks out the spent primer and opens the case mouth in one stroke. The seating die handles the other half of the job with a built-in bullet guide to keep things aligned, a crimp ring if you want to add a crimp, and the proper seating plug for the 6.5 PRC bullet profile.

Why Reloaders Trust the Redding 6.5 PRC Full Length Set

Redding has been building reloading gear in the USA since 1946, and the attention to detail shows. These dies are cut from quality alloy steel on precision lathes, heat treated, hand polished, and inspected before they ship, which is why they tend to produce tight runout numbers and last for decades of loading. Both dies use the industry standard 7/8-14 threaded bodies, so they thread right into any common single stage or turret press.

A Few Things Worth Knowing

The die box itself doubles as a loading block and storage case, with a spot built in for your shellholder plus room for the spare decapping pin and hex wrench that come in the box. The 6.5 PRC uses a #6 shellholder, which is sold separately, so grab one if you don't already have it in your kit. If you want to fine tune seating depth down the road, Redding offers micrometer seating upgrades and carbide size buttons that fit this set.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 80487
  • UPC: 611760804878
  • Cartridge: 6.5 PRC
  • Die Type: Full Length 2-Die Set
  • Application: Bottleneck Rifle Cases
  • Thread: 7/8-14 (industry standard)
  • Material: Alloy Steel
  • Bullet Diameter: 0.264"
  • Shellholder Size: #6 (sold separately)
  • Country of Origin: United States
  • Shipping Weight: 1.8 lbs

What’s Included

  • Full length sizing die with decapping rod assembly and neck expander (size button)
  • Seating die with bullet guide, built-in crimp ring, and seating plug
  • Spare decapping pin
  • Hex wrench
  • Instructions
  • Redding die box (doubles as loading block and storage)

Frequently Asked Questions

Does the Redding 6.5 PRC Full Length Die Set come with a shellholder?

No, the shellholder is not included and is sold separately. The 6.5 PRC uses a #6 shellholder, so pick one up if it isn't already in your kit. The die box does have a dedicated spot to store it once you have one.

What does the full length sizing die do?

It resizes your fired 6.5 PRC brass back down to SAAMI specifications so loaded rounds chamber in any standard rifle. It also removes the spent primer and opens the case neck in the same stroke thanks to the decapping rod and neck expander button. Full length sizing is the go-to choice if your ammo gets used across different rifles or in semi-autos.

Can I crimp with the seating die in this set?

Yes, the seating die has a built-in crimp ring, so you can apply a crimp if your load calls for it. You can also back it off and simply seat without crimping, which is what most 6.5 PRC precision loads prefer. The built-in bullet guide helps keep everything aligned for straight seating either way.

Will these Redding dies fit my press?

They use the industry standard 7/8-14 threaded bodies, so they thread into any common single stage, turret, or progressive press. That covers the vast majority of reloading presses on the market. No adapters or special hardware needed.

Additional information

UPC

611760804878

Manufacturer

Manufacturer Part Number

80487

Shipping Weight

1.8

Reviews

There are no reviews yet.

Be the first to review “Redding 6.5 PRC Full Length 2-Die Set (80487)”