Description
The Redding 6mm Creedmoor Series D Full Length Die Set is the straightforward, do-it-all pairing most handloaders reach for when they want reliable 6mm Creedmoor ammo without any fuss. It's a two-die set built for bottleneck cases, covering everything from resizing and decapping to seating your bullets. Redding has been turning out dies like these since 1946, and the reputation holds up thanks to steel bodies that are machined on precision lathes and heat treated for a long working life.
What the Redding 6mm Creedmoor Die Set Handles
The full length sizing die works the whole case, bringing the body, shoulder, and neck back down to minimum SAAMI dimensions so your rounds drop into any standard chamber with proper adjustment. It carries a decapping rod assembly with a neck expander button, which knocks out the spent primer and opens the neck back up in one stroke. If you run more than one 6mm Creedmoor rifle, full length sizing keeps your brass playing nice across all of them.
Dialing In the Seating Die
The conventional bullet seater includes a bullet guide, a built-in crimp ring, and the proper seating plug. You can run it as a straight seater or add a light crimp if your load calls for it, which gives you flexibility whether you're building hunting rounds or chasing tighter groups on paper. Both dies use the industry standard 7/8-14 thread, so they'll thread right into any standard single stage or progressive press.
A Set Built for the Long Haul
Redding uses quality alloy steels and tight tolerances throughout, and the dies carry a reputation for producing ammo that fits standard chambers regardless of action type. The sturdy plastic die box doubles as a handy loading block at the bench and keeps everything organized between sessions. Keep in mind the shell holder is sold separately, so grab a #1 shell holder if you don't already have one on hand for the 6mm Creedmoor case head.
Key Specifications
- Cartridge: 6mm Creedmoor
- Die Style: Full Length Sizing (2-Die Set)
- Series: Series D
- Number of Dies: 2 (Full Length Sizer and Bullet Seater)
- Thread Size: 7/8-14
- Bullet Diameter: 0.243 in
- Recommended Shell Holder: #1 (sold separately)
- Material: Alloy Steel
- Country of Origin: Made in the USA
- Manufacturer: Redding
- Manufacturer Part Number: 80443
- UPC: 611760804434
What’s Included
- Full Length Sizing Die with decapping rod assembly and neck expander (size button)
- Conventional Bullet Seating Die with bullet guide, built-in crimp ring, and seating plug
- Plastic die storage box
Frequently Asked Questions
Does the Redding 6mm Creedmoor Die Set come with a shell holder?
No, the shell holder is sold separately on this set. For 6mm Creedmoor you'll want a #1 shell holder. If you already load other cartridges that share that case head, there's a good chance you have one on the bench already.
Can the seating die apply a crimp?
Yes. The conventional seating die has a built-in crimp ring, so you can set it up to add a light crimp if your load calls for it, or run it as a straight seater without any crimp. That gives you room to tune it for hunting rounds or precision target loads.
Will these dies fit my press?
They should. Both dies use the industry standard 7/8-14 thread, which is the common size for single stage and most progressive presses. Just thread them in and adjust to your chamber.
What does the full length sizing die actually do?
It resizes the entire case, including the body, shoulder, and neck, bringing the brass back down to minimum SAAMI dimensions so loaded rounds chamber easily. The decapping rod also removes the spent primer in the same stroke. Full length sizing is the go-to choice if you shoot more than one rifle in the same cartridge or want fuss-free feeding.





Reviews
There are no reviews yet.