0
0

Redding Series B 3-Die Set .45-70 Gov’t Straight Wall (80209)

UPC: 611760802096

$80.99

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The .45-70 is one of those cartridges that rewards careful handloading, and this Redding Series B set gives you the three dies needed to do it right. Straight-wall cases like the .45-70 can't be sized and have their mouths expanded in a single pass, so this set breaks the job into separate steps for better case prep and a cleaner bullet fit. You get a full-length resizing die, a dedicated expander die, and a bullet seating die, all machined from Redding's alloy steel and held to tight tolerances for a long working life.

What the Redding .45-70 Set Does at the Bench

The full-length sizing die resizes the case body and houses a decapping rod assembly to knock out the spent primer in the same stroke. The expander die opens and flares the case mouth just enough to seat a .458 bullet without shaving lead or crumpling brass, which matters a lot when you're running cast bullets. The seating die rounds things out with a bullet guide, the proper seating plug, and a built-in crimp ring so you can set your overall length and roll or taper a crimp in the same operation.

Fitting the Redding Series B Dies to Your Press

Every Redding die uses the industry-standard 7/8-14 thread, so this set drops into any common single-stage or turret press without fuss. The .45-70 calls for a #18 shell holder, which is sold separately and not part of this kit. If you've loaded straight-wall pistol rounds before, the .45-70 setup will feel familiar: size, expand, then seat and crimp.

Storage and the Little Extras

The dies ship in Redding's plastic storage box, which doubles as a loading block to keep cartridges upright while you work. Inside you'll also find a spare decapping pin and an Allen wrench for the lock rings. It's a well-rounded set for anyone feeding a Marlin, a trapdoor Springfield, or a single-shot chambered in this classic old cartridge.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 80209
  • UPC: 611760802096
  • Cartridge: .45-70 Government
  • Series: Series B
  • Set Type: 3-Die Full Length Set (Straight Wall)
  • Dies Included: Full-length sizing, neck expander, bullet seating
  • Die Material: Alloy steel
  • Thread: 7/8-14 standard
  • Shell Holder: #18 (sold separately)
  • Bullet Diameter: 0.458"
  • Country of Origin: United States
  • Shipping Weight: 1.2813 lbs

What’s Included

  • Full-length resizing die with decapping rod assembly
  • Neck expander die with expanding plug
  • Bullet seating die with seating plug and built-in crimp ring
  • Plastic storage box / loading block
  • Spare decapping pin
  • Allen wrench for lock rings

Frequently Asked Questions

Does the Redding .45-70 die set come with a shell holder?

No, the shell holder is not included with this set. The .45-70 Government uses a #18 shell holder, which you'll need to pick up separately. It's a common size, so most retailers carry it right alongside the dies.

Why does the .45-70 need three dies instead of two?

Straight-wall cases like the .45-70 can't be full-length resized and have their mouths expanded in a single operation, so the job is split into separate steps. The sizing die handles the case body and decapping, the expander die opens the mouth for the bullet, and the seating die sets depth and crimp. Bottleneck cartridges typically only need two dies because the sizing die handles the neck in one pass.

Will this Redding set fit my press?

Yes. Every Redding die uses the industry-standard 7/8-14 thread, so this set threads into any common single-stage or turret press. There's no proprietary mounting or adapter to worry about.

Can I crimp cast bullets with this set?

You can. The seating die includes a built-in crimp ring that lets you seat the bullet and apply a crimp in the same stroke, which works well with the cannelure on cast and jacketed .45-70 bullets. Many reloaders set it up to seat and crimp together, though some prefer backing off the crimp and running a separate crimp step for fine-tuning.

Additional information

UPC

611760802096

Manufacturer

Manufacturer Part Number

80209

Shipping Weight

1.2813

Reviews

There are no reviews yet.

Be the first to review “Redding Series B 3-Die Set .45-70 Gov’t Straight Wall (80209)”