Description
The Redding Series A Full Length Die Set is the no-nonsense standard for anyone loading 7mm Remington Magnum. It's a two-die setup built for bottleneck cases, giving you a full length sizing die and a bullet seating die. The sizing die resizes the case body, shoulder, and neck down to minimum SAAMI dimensions, so your reloads chamber smoothly in any standard rifle. It comes fitted with a decapping rod assembly and neck expander button, knocking out the spent primer and opening the neck in one stroke. The seating die handles the back half of the job with a built-in bullet guide, crimp ring, and the proper seating plug for the 7mm's .284 diameter bullets.
What Sets the Redding 80136 Apart
Redding has a reputation for tight tolerances, and these dies earn it. They're machined on precision lathes, heat treated in controlled furnaces so they hold up over a lifetime of loading, then hand polished for smooth, drag-free operation. The seating die can be adjusted to apply a crimp if you want one, or left crimp-free for match-style loads where you're chasing consistency. Both dies use the industry standard 7/8-14 threaded bodies, so they'll thread right into just about any single stage or turret press you already own.
Loading 7mm Rem Mag With the Series A Set
The 7mm Remington Magnum is a flat-shooting favorite for elk, mule deer, and long-range work, and handloading lets you tune the round to your rifle instead of settling for whatever's on the shelf. This set gets you dialed in without a lot of fuss. The green die box doubles as a loading block and storage case, and tucked inside you'll find a spare decapping pin, a hex wrench, and a spot to stash your shell holder once you pick one up.
Keep in mind this is a conventional sizing and seating set, not a bushing or micrometer design. For most hunters and general handloaders, that's exactly the right tool for turning once-fired brass into dependable, accurate ammo.
Key Specifications
- Manufacturer: Redding
- Caliber: 7mm Remington Magnum
- Set Type: Full Length 2-Die Set (Series A)
- Case Type: Bottleneck
- Dies Included: Full Length Sizing Die, Bullet Seating Die
- Thread Size: 7/8-14
- Bullet Diameter: 0.284 in
- Standard Shell Holder: #6 (not included)
- Material: Alloy Steel
- Manufacturer Part Number: 80136
- UPC: 611760801365
- Shipping Weight: 1.2813 lbs
What’s Included
- Full length sizing die with decapping rod assembly and neck expander (size button)
- Bullet seating die with bullet guide, built-in crimp ring, and seating plug
- Spare decapping pin
- Hex wrench
- Plastic storage box / loading block
Frequently Asked Questions
Does the Redding 7mm Rem Mag die set include a shell holder?
No, the shell holder is not included with this set. For 7mm Remington Magnum you'll want a #6 shell holder, which you can add separately. The die box even has a dedicated spot to store it once you've got one.
Will these dies fit my press?
Yes, both dies use the industry standard 7/8-14 threaded bodies. That means they'll thread into virtually any standard single stage, turret, or progressive press on the market. It's the same thread pattern the vast majority of reloading dies use.
Can the seating die apply a crimp, or can I load without one?
The seating die has a built-in crimp ring, so you can adjust it to apply a crimp if your load calls for it. You can also back it off and seat bullets without crimping, which many handloaders prefer for accuracy. It's your call based on the bullet and the load you're building.
Is this a bushing or micrometer die set?
No, this is Redding's conventional Series A full length set with a standard sizing die and standard seating die. It resizes the full case body, shoulder, and neck in one pass and uses a traditional threaded seating plug. If you want bushing neck sizing or a micrometer seater, Redding offers those in their Type S and Competition lines.





Reviews
There are no reviews yet.