0
0

Redding .223 Rem Full Length Die Set (Series A) – 2-Die Set 80111

UPC: 611760801112

$62.99

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Redding has been building reloading dies since 1946, and this Series A set carries that reputation right to your bench. It's a conventional two-die setup for .223 Remington bottleneck brass, giving you everything you need to resize fired cases and seat bullets without any guesswork. If you shoot an AR, a bolt gun, or both, this is the kind of workhorse die set that just gets the job done year after year.

The full length resizing die works the case body, shoulder, and neck back down so your reloaded brass drops into any standard SAAMI chamber. It comes fitted with a decapping rod assembly and a neck expander button, so punching out the spent primer and opening the case neck happens in one stroke. The seating die handles the other half of the job with a built-in bullet guide that keeps things aligned, a crimp ring if you want to add one, and the proper seating plug for the .224 caliber bullets .223 uses.

What Sets the Redding Series A Die Set Apart

The reason reloaders keep coming back to Redding comes down to how these are made. The dies are machined on Hardinge super-precision lathes, then hand polished for smooth operation, ultrasonically cleaned, and inspected before they ever hit the box. The bodies use the industry standard 7/8-14 thread, so they'll thread into any common single stage or progressive press you already own. Pick one up and you can feel the quality in the fit and finish right away.

Setup and Everyday Use of the 80111 Die Set

These are known for being quick to set up and simple to run, which is a big plus whether you're new to handloading or cranking out volume. The plastic die box doubles as a loading block and keeps a spot for your shellholder, the spare decapping pin, and the hex wrench. Keep in mind the shellholder is sold separately, so grab a #10 if you don't already have one on hand.

Key Specifications

  • Caliber: .223 Remington / 5.56 NATO
  • Set Type: Full Length 2-Die Set (Series A)
  • Dies Included: Full Length Sizing Die, Seating Die
  • Thread: 7/8-14 (industry standard)
  • Bullet Diameter: 0.224
  • Recommended Shellholder: #10 (sold separately)
  • Material: Steel
  • Manufacturer: Redding
  • Manufacturer Part Number: 80111
  • UPC: 611760801112
  • Country of Origin: United States

What’s Included

  • Full Length Sizing Die (with decapping rod assembly and neck expander)
  • Seating Die (with bullet guide, built-in crimp ring, and seating plug)
  • Plastic storage case / loading block
  • Spare decapping pin
  • Allen (hex) wrench for lock rings

Frequently Asked Questions

Is a shellholder included with the Redding .223 die set?

No, the shellholder is sold separately. For .223 Remington you'll want a #10 shellholder. If you already reload other cartridges on the same case head size, there's a good chance you have one that works.

Will the Redding Series A set reload both .223 Remington and 5.56 NATO brass?

Yes. This full length die set is set up for .223 Remington and 5.56 NATO bottleneck cases since they share the same external dimensions. The full length sizer brings fired brass back to minimum SAAMI spec so your reloads chamber reliably.

Does the 80111 die set work with my press?

It should. The dies use the industry standard 7/8-14 thread, so they'll thread right into common single stage and progressive presses. No special adapters needed.

Can I crimp with this die set?

Yes, the seating die has a built-in crimp ring, so you can add a roll crimp by adjusting the die if you want it. If you'd rather keep things simple, you can set it up to seat without crimping. For semi-auto AR loads some reloaders prefer a separate taper crimp die, but it isn't required.

Additional information

UPC

611760801112

Manufacturer

Manufacturer Part Number

80111

Shipping Weight

1.2813

Reviews

There are no reviews yet.

Be the first to review “Redding .223 Rem Full Length Die Set (Series A) – 2-Die Set 80111”