Description
For the 6mm Dasher crowd chasing tight groups at distance, neck tension is everything, and this is where the Redding Type S Bushing Neck Die Set earns its keep. Instead of relying on a fixed button to size the neck, it uses interchangeable sizing bushings sold in .001 inch increments, so you can set up neck tension to match the exact wall thickness of the brass you're running. That kind of fine control is what separates a good load from a great one, and it's why this bushing style setup is a favorite among benchrest and long range reloaders.
What You Get in the 6mm Dasher Type S Set
This is a three-die arrangement built around the Type S Bushing Neck Sizing Die, a Body Die, and a standard series seating die. The neck die handles sizing and decapping, the body die full-length resizes the case body and bumps the shoulder when brass gets stubborn after repeated firings, and the seating die sets your bullets. The dies are machined from heat-treated steel and cut to SAAMI spec, so you're getting the precision Redding is known for.
Tuning Neck Tension on Your Dasher Brass
The bushing self-centers on the case neck, which naturally improves concentricity and keeps runout in check. The adjustable decapping rod lets you position the bushing to size only part of the neck length if you'd rather leave a section unsized. The die ships with a standard size button, which works well for commercial brass used as is, plus a decapping pin retainer for those who sort or turn necks and want to skip the button entirely.
Do keep in mind the bushings themselves are sold separately, which is standard for the Type S line. The easiest way to find your starting bushing is to measure the outside neck diameter of a few loaded or dummy rounds and subtract a thousandth or two for tension. Redding also backs these dies with their reputation for lifetime quality, so it's a setup you can build a load around for years.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 78648
- UPC: 611760786488
- Caliber: 6mm Dasher
- Die Type: Type S Bushing Neck Die Set (3-Die)
- Dies Included: Bushing Neck Sizing Die, Body Die, Standard Seating Die
- Material: Heat-Treated Steel
- Bushing Increments: .001 inch
- Thread Size: 7/8"-14
- Bushings Included: No (sold separately)
- Shell Holder Included: No (uses #1 shell holder)
- Shipping Weight: 1.47 lbs
What’s Included
- Type S Bushing Neck Sizing Die (with decapping rod and standard size button)
- Body Die
- Standard series seating die
- Decapping pin retainer
- Storage case
Frequently Asked Questions
Does the Redding Type S Bushing Neck Die Set for 6mm Dasher come with bushings?
No, the bushings are sold separately, which is standard across the entire Type S line. This lets you choose the exact bushing size to match your brass and the neck tension you want. To find your starting size, measure the outside neck diameter of a few loaded rounds and subtract one or two thousandths.
What dies are included in this 6mm Dasher set?
You get three dies: the Type S Bushing Neck Sizing Die, a Body Die, and a standard seating die. The neck die sizes and decaps, the body die handles full-length body sizing and shoulder bump when brass gets tight after multiple firings, and the seating die sets your bullets.
What's the advantage of a bushing neck die over a standard neck sizing die?
Bushing dies use interchangeable bushings in .001 inch increments, so you can precisely dial in neck tension instead of being locked into one fixed size. The bushing also self-centers on the case neck, which improves concentricity and reduces runout. For a precision cartridge like the 6mm Dasher, that level of control helps squeeze out consistency.
Can I size only part of the case neck with this die?
Yes. The adjustable decapping rod lets you position the bushing to size just a portion of the neck length if you prefer to leave a section unsized. This is a handy feature for reloaders fine-tuning their process for the best fit in their chamber.





Reviews
There are no reviews yet.