Description
The Redding Type S Bushing Neck Die Set is built for .24 Nosler handloaders who want direct control over neck tension instead of settling for whatever a standard die gives them. Rather than sizing the whole neck to a fixed dimension, this system uses interchangeable bushings so you pick exactly how much the neck gets worked. That means less brass stretching, better case life, and the kind of consistency that shows up on paper when you're chasing small groups.
What Sets the .24 Nosler Type S Bushing Neck Die Set Apart
The heart of the set is the bushing-style neck sizing die. It accepts interchangeable sizing bushings available in .001 inch increments, so you can match the bushing to your brass and the neck tension you're after. The bushing floats and self-centers on the case neck, which is a big part of why these dies are known for improved concentricity and lower runout. The adjustable decapping rod lets you position the bushing to size only part of the neck length if that's how you like to work your cases.
Flexibility for the Way You Load the .24 Nosler
The decapping rod comes with a standard size button, which is handy if you're running commercial brass as-is. For folks who sort or turn their necks for uniformity, a decapping pin retainer is included so you can size with the bushing alone and skip the button entirely. Between the body die for bumping the shoulder back into spec and the seating die for setting bullets, you've got a complete setup to take fired .24 Nosler brass through a full reloading cycle.
Keep in mind the bushings themselves are sold separately so you can choose the exact size for your brass. A good rule of thumb is to measure the outside diameter of a loaded, seated round and subtract a couple thousandths to land on your starting bushing. For anyone serious about precision .24 Nosler loads, this set gives you the mechanical repeatability that handloading is really all about.
Key Specifications
- Manufacturer: Redding
- Cartridge: .24 Nosler
- Die Type: Type S Bushing Neck Die Set
- Number of Dies: 3
- Bullet Diameter: 0.243
- Bushing Range: 0.259 to 0.267
- Bushing Increments: .001 inch
- Standard Shellholder: #10
- Thread: 7/8-14
- Bushings Included: No, sold separately
- Manufacturer Part Number: 78320
- UPC: 611760783203
- Shipping Weight: 1.5 lbs
What’s Included
- Type S Bushing Neck Sizing Die
- Body Die
- Standard Bullet Seating Die
- Decapping rod with standard size button
- Decapping pin retainer
- Wrench
- Extra decapping pin
- Redding die box
Frequently Asked Questions
Does the Redding Type S Bushing Neck Die Set come with bushings?
No, the bushings are sold separately so you can select the exact size for your brass and the neck tension you want. Bushings are offered in .001 inch increments, with a range for .24 Nosler running roughly from .259 to .267. To find your starting bushing, measure the outside neck diameter of a loaded round and subtract a couple thousandths.
What dies are included in this .24 Nosler set?
This three-die set includes a Type S Bushing Neck Sizing Die, a Body Die, and a standard Bullet Seating Die. The neck sizing die handles neck tension through the bushing, the body die bumps the shoulder back to spec without touching the neck, and the seating die sets your bullets. It's a complete setup for taking fired brass through a full reloading cycle.
What shellholder do I need for .24 Nosler?
The .24 Nosler uses a standard #10 shellholder. The shellholder is not included with the die set and is sold separately, so make sure you have the right one on hand before you start loading.
Can I size only part of the neck with this die?
Yes. The adjustable decapping rod lets you position the bushing to resize only a portion of the neck length if that's how you prefer to work your cases. This partial-neck sizing approach is popular with precision reloaders who want to preserve some of the fired neck fit to their chamber.




Reviews
There are no reviews yet.