Description
The Redding Type S Bushing Neck Die Set gives .300 Win Mag handloaders real, repeatable control over one of the most important parts of case prep: neck tension. Instead of being locked into a single fixed neck diameter like a standard die, this set works with interchangeable sizing bushings that let you tune how much you squeeze the neck down. That flexibility is a big deal when you're chasing consistent bullet pull and tighter groups.
How the Type S Bushing Neck Die Works
The heart of the set is the Type S bushing style neck sizing die. It accepts bushings that come in .001-inch increments, so you can match the neck tension to your brass, your bullet, and the way your rifle likes to shoot. The bushings float and self-center on the case neck, which helps keep everything concentric and reduces runout. There's also an adjustable decapping rod that lets you position the bushing to size only part of the neck length if you'd rather leave a section unsized. Keep in mind the sizing bushing is sold separately, so you'll want to pick the right size for your setup.
What's Inside This .300 Win Mag Set
This is a true 3-die package. Along with the Type S bushing neck sizing die, you get a body die for bumping the shoulder and full-length sizing the case body without touching the neck, plus a standard series seating die for getting your bullet seated cleanly. The dies are built from case-hardened steel and threaded in the standard 7/8-14, so they'll fit any common single-stage or turret press. A decapping pin retainer and spare decapping pin come along too.
Who Gets the Most Out of It
If you're loading .300 Win Mag for long-range work, hunting, or just want to extend brass life by only working the neck, this setup earns its keep. Being able to swap bushings and fine-tune tension without overworking the brass is exactly what separates good handloads from great ones.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 78153
- UPC: 611760781537
- Caliber: .300 Winchester Magnum
- Bullet Diameter: 0.308 in
- Die Set Type: Type S Bushing Neck (3-Die)
- Number of Dies: 3
- Bushing Adjustment: 0.001 in increments
- Bushing Range: 0.330 to 0.338 in
- Material: Case-Hardened Steel
- Thread Size: 7/8-14
- Standard Shellholder: #6
- Bushing Included: No (sold separately)
- Shellholder Included: No
What’s Included
- Type S Bushing Neck Sizing Die (with decapping rod and standard size button)
- Body Die
- Standard Series 92000 Seating Die
- Decapping pin retainer
- Spare decapping pin
- Plastic storage box
Frequently Asked Questions
Does the Redding Type S Bushing Neck Die Set come with bushings?
No, the sizing bushings are sold separately. This lets you choose the exact bushing diameter that matches your brass and the neck tension you're after. Redding offers them in both hardened steel and titanium nitride coated versions, in .001-inch increments.
What's the difference between the neck sizing die and the body die in this set?
The Type S bushing neck sizing die sizes just the case neck using an interchangeable bushing to set tension. The body die full-length sizes the case body and bumps the shoulder for proper chambering without touching the neck. Running them together lets you work only the parts of the case that need it, which helps extend brass life.
Is a shellholder included with the 78153 die set?
No, a shellholder is not included. For .300 Win Mag you'll want a #6 shellholder. It's an easy add-on and one you likely already have if you're loading cartridges in this family.
Will these dies fit my press?
Yes. The dies use the standard 7/8-14 thread, so they'll thread into any common single-stage, turret, or progressive press. No special adapters needed.



Reviews
There are no reviews yet.