0
0

Redding Type S Full Bushing Die 6.5 GAP 4S – 77845

UPC: 611760778452

$116.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The 6.5 GAP 4S is George Gardner's take on the 6.5 SAUM, a short, fat, beltless case built for Precision Rifle Series work and long-range hunting. If you're running one, you already know this isn't a grab-a-box-off-the-shelf cartridge, so the brass deserves dies that treat it right. This Redding Type S Full Bushing Die does both jobs at once: it sizes the full case body and bumps the shoulder while controlling the neck through an interchangeable bushing, all in a single pass.

What the Type S Bushing Die Does Differently

A standard full-length die sizes every neck to one fixed dimension regardless of how thick your brass is, then drags it back over an expander ball. That overworks the neck and can introduce runout. The Type S approach lets the bushing size the neck to the exact outside diameter you want. Because the bushing is free to self-center on the case neck, concentricity improves, and you're only working the brass as much as it genuinely needs. For a wildcat-style case like the GAP 4S where brass costs real money, less overworking means more loadings before the necks give up.

Dialing In Your 6.5 GAP 4S Bushing

Bushings are sold separately and come in .001" increments in both heat-treated steel and titanium nitride. To pick a size, measure the outside neck diameter of a loaded round with a micrometer and subtract .001" to .002" to account for brass spring-back. With a .264 bullet seated in GAP 4S headstamped brass, loaded neck diameter runs right around .292", so most loaders land on a bushing in that neighborhood. It's smart to grab two or three sizes so you can experiment with neck tension once your powder charge and seating depth are nailed down.

Built-In Versatility

The die ships with an adjustable decapping rod and a decapping pin retainer. That retainer lets you neck size without the sizing button, which is handy if you turn your necks for uniformity. Pull the bushing and internal parts entirely and the die works as a body die. It's made in the USA and carries the fit and finish Redding has built its name on.

Key Specifications

  • Manufacturer: Redding Reloading Equipment
  • Manufacturer Part Number (MPN): 77845
  • UPC: 611760778452
  • Cartridge: 6.5 GAP 4S
  • Die Type: Type S Bushing Full Length Sizing Die
  • Bushing Increments: .001"
  • Bushing Compatibility: Standard Redding steel and titanium nitride neck bushings
  • Decapping: Adjustable decapping rod with decapping pin retainer
  • Body Die Capability: Yes, with bushing and internal parts removed
  • Country of Origin: United States
  • Shipping Weight: 0.775 lb

What’s Included

  • Redding Type S Full Bushing sizing die for 6.5 GAP 4S
  • Adjustable decapping rod
  • Standard size button
  • Decapping pin retainer
  • Instruction sheet

Frequently Asked Questions

Does the Redding Type S Full Bushing Die come with a bushing?

No, bushings are sold separately. This lets you pick the exact size that matches your brass and the neck tension you're after. Redding bushings interchange across all their bushing-style dies and come in .001" increments in steel or titanium nitride.

What bushing size should I use for the 6.5 GAP 4S?

Measure the outside neck diameter of a loaded round with a micrometer, then subtract .001" to .002" for brass spring-back. With a .264 bullet in GAP 4S brass, loaded neck diameter typically runs around .292", so most loaders start near there. Buying a couple of adjacent sizes is a good idea since brass thickness varies and you'll want to test tension later.

Do I need a shellholder with this die?

Yes, the shellholder is sold separately and is not included with the die. You'll want one sized for the 6.5 GAP 4S case head. It's an easy add-on if you don't already have the correct one in your kit.

Can this Type S die be used as a body die?

It can. Remove the bushing and the internal parts and the die will size the case body and bump the shoulder without touching the neck. That gives you some extra flexibility if you want to separate body sizing from neck sizing in your process.

Additional information

UPC

611760778452

Manufacturer

Manufacturer Part Number

77845

Shipping Weight

0.775

Reviews

There are no reviews yet.

Be the first to review “Redding Type S Full Bushing Die 6.5 GAP 4S – 77845”