Description
The 6mm GT has earned its spot in the precision rifle crowd, and it deserves dies that can keep up. Redding's Type-S Full Length Bushing Die sizes the entire case body, bumps the shoulder, and controls neck tension all in a single operation. Instead of relying on a standard expander to set your neck diameter, this die uses interchangeable bushings available in .001 inch increments, so you can match neck tension to your exact brass thickness and load. That kind of control is what separates groups that hover around the ragged hole from the ones that open up.
What the 6mm GT Type-S Die Brings to the Bench
The bushing floats slightly so it can self-center on the case neck, which helps keep runout low and concentricity high. The adjustable decapping rod lets you reposition the bushing to size only part of the neck length if you want to leave a portion untouched for better alignment in the chamber. It ships with a standard size button and a decapping pin retainer, so you have the flexibility to run the die either with the button in place or pulled out entirely if you turn your necks and want the bushing doing all the work.
Setting Up Your 6mm GT Bushing Die
One thing worth knowing up front is that bushings are sold separately. That is by design, since neck tension is a personal preference that depends on your brass and your rifle, and Redding lets you pick the exact bushing that fits your setup. A good starting point is measuring a loaded round's neck diameter and selecting a bushing a couple thousandths under that. Pull the bushing and all the internal parts and the die doubles as a body die, which is handy if you want to bump shoulders without touching the necks.
Built from hardened steel with the fit and finish Redding is known for, this die threads into any standard 7/8-14 press and will hold its dimensions load after load. For anyone chasing consistency with the 6mm GT, it is a straightforward way to take real command of your sizing process.
Key Specifications
- Manufacturer: Redding
- Model: Type-S Full Length Bushing Sizing Die
- Caliber: 6mm GT
- Die Type: Full Length Resizing / Bushing Die
- Bushing Increments: .001 inch
- Material: Hardened Steel
- Thread: 7/8-14 Standard Press
- Manufacturer Part Number: 77199
- UPC: 611760771996
- Shipping Weight: 0.75 lbs
What’s Included
- Type-S Full Length Bushing Sizing Die
- Decapping rod with standard size button
- Decapping pin retainer
- Plastic storage case
Frequently Asked Questions
Does the 6mm GT Type-S die come with a bushing?
No, bushings are sold separately. Redding leaves them out on purpose so you can select the exact size that matches your brass and desired neck tension. A common approach is to measure the neck diameter of a loaded round and choose a bushing about one to two thousandths smaller.
Can this die be used as a body die?
Yes. By removing the bushing and all of the internal parts, the Type-S Full Length die works as a body die. That lets you size the case body and bump the shoulder without touching the neck, which is useful if you prefer to neck size separately.
What is the advantage of a bushing die over a standard full length sizer?
A standard die sets neck tension with a fixed expander, while the bushing system lets you choose the exact amount of tension in .001 inch steps. The bushing also self-centers on the case neck, which helps keep runout low and improves concentricity. For precision cartridges like the 6mm GT, that added control translates directly to more consistent loads.
Will this die fit my reloading press?
Yes. It uses the standard 7/8-14 thread, so it threads into any common single stage or turret press. You will need the correct shell holder for the 6mm GT, which is not included with the die.





Reviews
There are no reviews yet.