Description
This is Redding's .338 diameter Titanium Nitride neck sizing bushing, the handy little component that lets you control exactly how much your case necks get worked. Instead of oversizing the neck and then dragging it back open with an expander, you simply pick the bushing that sizes the outside of the neck to where you want it. That means less brass working, longer case life, and the kind of consistent neck tension that shows up on paper.
The TiN version starts with the same heat-treated steel as Redding's standard bushings, hand polished to a surface hardness in the Rc 60 to 62 range, then adds a titanium nitride surface treatment. That coating pushes the effective hardness even higher and reduces friction as the neck passes through, so sizing effort drops and the bushing holds its dimension over a long reloading life. It carries the familiar bronze-gold TiN color and is clearly marked with its size for quick identification on the bench.
Where the .338 Titanium Nitride Bushing Fits
This bushing shares the standard external dimensions of 1/2 inch O.D. by 3/8 inch long, so it drops right into any Redding bushing-style die, including the Type S Neck, Type S Full Length, and Competition Bushing Neck dies. They interchange freely, which makes it easy to keep a few sizes on hand and swap tension on the fly. Bushings are offered in .001 inch increments across the full range, so you can fine-tune to your exact brass.
Picking the Right Redding TiN Bushing Size
Most reloaders measure the outside neck diameter of a loaded round and subtract about .001 to .002 inch to allow for brass spring-back. That lands you on the right bushing for your desired neck tension. Keep in mind brass neck wall thickness varies between brands and firings, so it pays to measure the actual brass you're loading and keep a size on either side of your target. For the .338 caliber crowd loading cartridges like .338 Lapua, .338 Win Mag, or .338-06, this bushing is a smart piece of the precision puzzle.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 76338
- UPC: 611760763380
- Bushing Diameter: .338 inch
- Type: Titanium Nitride Neck Sizing Bushing
- Material: Heat-treated steel with Titanium Nitride surface treatment
- Surface Hardness: Rc 60-62
- External Dimensions: 1/2 inch O.D. x 3/8 inch long
- Color: Bronze/Gold (TiN)
- Compatibility: All Redding bushing-style sizing dies
- Quantity: 1 bushing
- Shipping Weight: 0.0188 lb
What’s Included
- One Redding .338 Titanium Nitride neck sizing bushing
Frequently Asked Questions
What size bushing do I actually need for my .338 loads?
The usual method is to measure the outside neck diameter of a loaded round, then subtract about .001 to .002 inch to allow for brass spring-back. That number gives you the bushing size for your target neck tension. Since neck wall thickness varies by brass brand and number of firings, it's smart to measure the exact brass you're loading and keep a size above and below your pick on hand.
Will this .338 Titanium Nitride bushing fit my Redding die?
Yes. It uses the standard 1/2 inch O.D. by 3/8 inch long external dimensions and interchanges freely in all Redding bushing-style dies, including the Type S Neck, Type S Full Length, and Competition Bushing Neck dies. The bushing drops in with the numbers facing down.
What's the difference between the Titanium Nitride and the plain steel bushing?
Both start as the same heat-treated steel hand polished to a surface hardness of Rc 60 to 62. The Titanium Nitride version adds a surface treatment that increases the effective hardness and reduces friction as the neck passes through, which lowers sizing effort. Functionally they size the same diameter; the TiN just makes the stroke a little slicker.
Does this bushing come with a die or expander?
No, this is the bushing only. The die, shellholder, and any expander components are sold separately. You'll need a Redding bushing-style die to use it.




Reviews
There are no reviews yet.