Description
If you're running a Redding Type S bushing die and chasing tighter groups, the right bushing is where the magic happens. This is the .308 diameter titanium nitride bushing, Redding part number 76308, built to let you set precise neck tension instead of mashing your case necks down and springing them back out every firing. That kind of control is what keeps your brass alive longer and your seating depth consistent round after round.
What the TiN Coating Does for Your .308 Bushing
Underneath the coating, these start as heat treated steel, hand polished to a surface hardness in the Rc 60 to 62 range to cut down sizing effort. The titanium nitride treatment layers on top of that to push the effective surface hardness even higher and slick up the pass. With a lubed case neck, a TiN bushing slides through clean and leaves the neck looking the way it should. It's the kind of upgrade you notice most when you're loading in volume and want every pull of the handle to feel the same.
Fitting the Redding .308 Neck Sizing Bushing
All Redding neck sizing bushings share the same outside dimensions, half inch O.D. by three eighths long, so they drop right into any Redding bushing style die. They also interchange with L.E. Wilson style bushings, which means they'll work in a lot of RCBS, Hornady, and other dies that accept that pattern. Each bushing is marked with its size I.D. so you can grab the right one off the shelf without guessing.
Picking the Right Size
Sizing bushings are sold singly and come in .001 inch increments, so dialing in your load means picking the exact number you need. The tried and true method is to measure the outside neck diameter of a loaded cartridge with a good micrometer, then subtract about .001 to .002 inches. That accounts for brass spring back and gives you a proper press fit on the bullet. If your particular brass and bullet combo wants a hair more or less grip, you can step a thousandth either direction and feel the difference at the seating stage.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 76308
- UPC: 611760763083
- Diameter: .308"
- Coating: Titanium Nitride (TiN)
- Material: Heat-treated steel
- Surface Hardness: Rc 60-62 base steel
- Outside Dimensions: 1/2" O.D. x 3/8" long
- Quantity: 1 (sold singly)
- Fitment: Redding bushing-style dies; interchanges with L.E. Wilson style bushings
- Caliber Use: .308 Winchester / 7.62 NATO neck sizing
What’s Included
- One .308 diameter Redding titanium nitride neck sizing bushing (part 76308)
Frequently Asked Questions
Which dies does this Redding .308 neck sizing bushing fit?
It drops into any Redding bushing style die, including the Type S Full-Length, Neck, and Competition dies. Because it uses the same external dimensions as L.E. Wilson style bushings, it also interchanges with many RCBS, Hornady, and other dies built to accept that pattern. All Redding bushings share a half inch O.D. by three eighths length.
How do I know if .308 is the right bushing size for me?
Measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract about .001 to .002 inches. That figure points you to the bushing you want, accounting for brass spring back and giving you a proper press fit on the bullet. If this .308 bushing doesn't match that math for your brass and bullet combo, you may want a size a thousandth up or down.
What's the benefit of the titanium nitride coating over plain steel?
The steel bushing is already hand polished to an Rc 60 to 62 surface hardness, and the TiN treatment bumps the effective surface hardness higher while slicking up the pass. In practice that means less sizing friction and a smoother stroke, which is nice when you're loading in volume. With the case neck lubed, it slides through clean.
Does this bushing come in a set or is it sold by itself?
It is sold singly, so you're getting the one .308 diameter bushing. Redding offers these in .001 inch increments across a wide range of calibers, which lets you build out exactly the sizes your loads call for without buying numbers you don't need.




Reviews
There are no reviews yet.