Description
If you're serious about squeezing every bit of consistency out of your handloads, a bushing die setup is tough to beat, and the .303 Titanium Nitride bushing is one of the small pieces that makes the whole system work. Instead of forcing your case necks down with a one-size-fits-all die, you pick the exact bushing that matches your brass and bullet, then set the precise amount of neck tension you want. This one measures .303 inches and carries Redding's part number 76303.
Underneath the gold-colored coating is heat-treated steel, hand polished to a surface hardness of Rc 60-62. The Titanium Nitride treatment on top bumps up that surface hardness even further and slicks things down, so cases slide through with noticeably less effort and drag. Less friction means less brass getting worked, which is exactly what you want if you're chasing accuracy and want your cases to last through more firings.
How the .303 Redding Bushing Dials In Neck Tension
The idea behind bushing sizing is simple once you've done it. Measure the outside diameter of a loaded cartridge neck with a good micrometer, then subtract about .001 to .002 inches to account for brass spring-back and the grip needed to hold the bullet. That final number is the bushing size you reach for. Because only the neck gets touched and not the shoulder or body, you avoid the excessive resizing that a standard full-length die can cause.
Where the .303 TiN Neck Sizing Bushing Fits
These bushings drop right into Redding's bushing-style dies, including the Type S Full and Neck Sizing dies, and they'll also work in most other popular brands of bushing dies. Redding offers the full lineup in .001 inch steps covering calibers from .17 all the way to .338, so once you know your number you can match it exactly. It measures 1/2 inch outside diameter and 3/8 inch long, and every bushing is marked with its size so you're never guessing which one you grabbed from the box.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 76303
- UPC: 611760763038
- Bushing Diameter: .303 inch
- Coating: Titanium Nitride (TiN)
- Material: Heat-Treated Steel
- Surface Hardness: Rc 60-62
- Outside Diameter: 1/2 inch
- Length: 3/8 inch
- Fitment: Redding bushing-style dies and most popular brands
- Shipping Weight: 0.0188
What’s Included
- One Redding .303 Titanium Nitride neck sizing bushing (76303)
Frequently Asked Questions
How do I know if the .303 bushing is the right size for my loads?
Measure the outside diameter of a loaded cartridge neck with a precision micrometer, then subtract about .001 to .002 inches to allow for brass spring-back and bullet grip. If that math lands you at .303, this is your bushing. It's always smart to size and seat a few test rounds to confirm the neck tension feels right before loading a full batch.
Will this Redding bushing work in dies from other brands?
It interchanges freely in all of Redding's bushing-style sizing dies, including the Type S Full and Neck Sizing dies. It also works in most other popular brands of bushing dies thanks to the standard 1/2 inch outside diameter and 3/8 inch length. If you're running a different brand, just double check that your die uses the same standard bushing dimensions.
What does the Titanium Nitride coating actually do?
The TiN coating goes on top of the already heat-treated steel to increase the surface hardness even further and add lubricity. In plain terms, that means less friction and drag as your case neck passes through, so you work the brass less and get smoother, more consistent sizing. It's the reason a lot of handloaders prefer the TiN bushings over plain steel.
Is the .303 TiN bushing marked so I can tell it apart from others?
Yes, every Redding bushing is stamped with its size, so once you've built up a collection you can grab the right one without guessing. Pairing it with Redding's bushing storage box keeps the whole set organized and easy to read at a glance.




Reviews
There are no reviews yet.