0
0

Redding Titanium Nitride Neck Sizing Bushing .289 (76289)

UPC: 611760762895

$34.99

6 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're running a Redding bushing-style sizing die and want real control over your case neck tension, the .289 Titanium Nitride bushing is one of the small parts that makes a big difference at the bench. Instead of a fixed-diameter neck sizing die working your brass harder than it needs, a bushing lets you size the neck just enough to hold the bullet securely. That means less brass fatigue, more consistent seating, and ammo that behaves the same round after round.

What the .289 TiN Bushing Brings to the Bench

This bushing starts as heat-treated steel, hand polished to a surface hardness in the Rc 60-62 range to cut down on sizing effort. From there, Redding adds the titanium nitride coating, which bumps up surface hardness even further and slicks things down so the brass glides through with less friction. With a lubed neck, it tends to leave your brass clean without the drag marks you'll sometimes get from an uncoated bushing. Each one is clearly marked with its size for quick identification when you've got a stack of them in the box.

Fitting the Redding Neck Sizing Bushing to Your Setup

Every Redding neck sizing bushing shares the same external dimensions of 1/2 inch outside diameter by 3/8 inch long, so it drops right into any Redding bushing-style sizing die and interchanges with L.E. Wilson style bushings too. The full lineup runs in .001 inch increments and covers calibers from .17 all the way up to .338, so matching one to your load is straightforward.

Picking the Right Size

To land on the correct bushing, measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001 to .002 inch to account for brass spring back and bullet tension. The .289 size fits neatly into that system for the necks it's meant to serve. If you're the type who likes to fine-tune tension for accuracy, keeping a couple of neighboring sizes on hand lets you experiment and find what your rifle likes best.

Key Specifications

  • Diameter: .289 inch
  • Coating: Titanium Nitride (TiN)
  • Material: Heat-treated steel
  • Surface Hardness: Rc 60-62
  • Dimensions: 1/2 inch O.D. x 3/8 inch long
  • Compatibility: All Redding bushing-style sizing dies; interchanges with L.E. Wilson style bushings
  • Caliber Range Covered by Line: .17 to .338
  • Manufacturer: Redding
  • Manufacturer Part Number: 76289
  • UPC: 611760762895
  • Country of Origin: United States

What’s Included

  • One Redding .289 Titanium Nitride Neck Sizing Bushing (76289)

Frequently Asked Questions

Which dies does the Redding .289 neck sizing bushing fit?

It fits all Redding bushing-style sizing dies and shares a standard 1/2 inch O.D. by 3/8 inch long footprint. That same sizing also lets it interchange with L.E. Wilson style bushings, so it slots into a lot of common setups.

How do I know if .289 is the right bushing size for my load?

Measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001 to .002 inch to allow for brass spring back and bullet tension. If that math lands you at .289, this is your bushing. Many handloaders keep a size above and below on hand to tune neck tension for accuracy.

What's the advantage of the titanium nitride version over the steel bushing?

Both start as heat-treated steel hand polished to an Rc 60-62 surface hardness. The titanium nitride coating adds even more surface hardness and reduces sizing friction, so brass glides through smoother and the bushing holds up over the long haul. With a lubed neck it also tends to leave the brass clean without marking it.

Does a bushing let me size only part of the neck?

Yes, that's one of the real perks of a bushing system. By choosing a bushing matched to your brass, you size the neck just enough to hold the bullet securely without overworking it like a conventional full-diameter neck die can. The result is longer brass life and more consistent seating.

Additional information

UPC

611760762895

Manufacturer

Manufacturer Part Number

76289

Shipping Weight

0.0188

Reviews

There are no reviews yet.

Be the first to review “Redding Titanium Nitride Neck Sizing Bushing .289 (76289)”