0
0

Redding 6.5 PRC Body Die (75487) – Case Body Resizing Die

UPC: 611760754876

$39.99

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If your 6.5 PRC brass has started feeling snug on close or you're chasing consistent headspace, the Redding Body Die is the tool that sorts it out. It full length sizes the case body and bumps the shoulder back into proper position for easy chambering, all while leaving the neck completely untouched. That makes it a favorite among precision handloaders who want tight control over their shoulder bump without reworking neck tension every time.

What the Redding 6.5 PRC Body Die Actually Does

Think of this die as a dedicated body-and-shoulder tool. Over several firings, brass flows and the case body expands, which is usually what causes that tight bolt close. This die reshapes the body and sets the shoulder back the amount you dial in, so cases drop into the chamber the way they should. Because it has no internal parts, there's no expander ball or decapping assembly to fuss with. You control the amount of shoulder bump by adjusting the die's position relative to your shellholder, and a datum-style comparator makes setting that bump far more repeatable.

Why Reloaders Pair the Redding Body Die With a Neck Die

This one doesn't size the neck at all, which is the whole point. It's built as a companion to a bushing-style neck die like the Redding Type S Neck Die or a Competition Neck Sizing Die. The workflow is simple: run the brass through the body die to handle the body and shoulder, then run it through your neck die to set neck tension exactly how you like it. Shooters chasing minimal bullet runout lean on this two-die approach for a reason, since it keeps the case neck geometry clean and consistent.

Build and Fitment for the Redding Body Die

Made in the USA from quality steel, this die carries the standard 7/8"-14 thread and drops into any common single-stage press. It uses the #6 standard shellholder for 6.5 PRC, which is sold separately. The die ships with a lock ring so you can set it once and keep your adjustment from run to run. For serious 6.5 PRC loaders running a neck sizing setup, it's a straightforward, dependable piece that earns its spot on the bench.

Key Specifications

  • Caliber: 6.5 PRC
  • Die Type: Body Die (case body sizing)
  • Manufacturer: Redding
  • Manufacturer Part Number: 75487
  • UPC: 611760754876
  • Thread Size: 7/8"-14
  • Shellholder: #6 (sold separately)
  • Internal Parts: None (no expander or decapping assembly)
  • Bullet Diameter: 0.264"
  • Country of Origin: United States
  • Shipping Weight: 0.39 lb

What’s Included

  • One Redding 6.5 PRC Body Die
  • Lock ring
  • Die box
  • Instructions

Frequently Asked Questions

Does the Redding 6.5 PRC Body Die size the case neck?

No, this die intentionally leaves the neck alone. It only sizes the case body and bumps the shoulder for proper chambering. That's why it's typically paired with a separate neck die to set your neck tension.

What do I pair with the Redding 6.5 PRC Body Die?

It's designed as a companion to a bushing-style neck die such as the Redding Type S Neck Die or a Competition Neck Sizing Die. Run your brass through the body die first for the body and shoulder, then through the neck die for neck tension. This combo is popular with loaders who want low bullet runout and precise control over each step.

Do I need a separate shellholder for this die?

Yes. The 6.5 PRC uses the Redding #6 standard shellholder, which is sold separately. The die itself uses the standard 7/8"-14 thread, so it fits common single-stage presses without any extra adapters.

Can the Redding Body Die help with tight or hard-to-chamber 6.5 PRC brass?

That's exactly what it's built for. After repeated firings and neck sizing, cases can grow and start to feel tight on close, and this die reshapes the body and sets the shoulder back so they chamber smoothly again. Using a datum gauge to measure your shoulder bump makes dialing it in much more consistent.

Additional information

UPC

611760754876

Manufacturer

Manufacturer Part Number

75487

Shipping Weight

0.39

Reviews

There are no reviews yet.

Be the first to review “Redding 6.5 PRC Body Die (75487) – Case Body Resizing Die”