Description
If you neck size your .308 brass for accuracy but keep running into cases that drag on chambering after a handful of firings, the Redding .308 Win Body Die is the tool that solves it. It full-length resizes the case body and sets the shoulder back just enough to restore easy chambering, all while leaving the case neck completely alone. That means the tight neck tension and concentricity you worked for during neck sizing stays exactly where you want it.
How the Redding 75155 Body Die Earns Its Spot on the Bench
Body dies have been a staple for benchrest and accuracy-focused handloaders for a long time, and Redding built this one with no internal parts, so there's no expander ball or decapping pin to deal with. You simply control the amount of shoulder bump by adjusting the die's position relative to the shellholder, the same way you'd fine-tune a conventional sizer. Pair it with a case gauge or a comparator and you can dial in your headspace to match your rifle's chamber for repeatable, snug-but-not-tight fit.
Build Quality You Expect From the Redding .308 Body Die
This one is machined from steel in the United States using Redding's tight manufacturing tolerances, and it uses the standard 7/8"-14 threading, so it drops right into any common single-stage press. It ships with a lock ring so your setting holds once you've got it dialed, and it tucks into a plastic storage box when you're done. For folks running Redding's bushing neck die sets, this is the companion piece that keeps brass chambering smoothly batch after batch.
The real-world payoff is simple: brass that was starting to fight you at the bolt goes back to feeding like new, your necks stay untouched, and you extend the usable life of your case stock without full-length sizing everything every single time.
Key Specifications
- Caliber: .308 Winchester
- Die Type: Body Die
- Function: Full-length body resize with shoulder bump, neck left untouched
- Internal Parts: None (no expander or decapping assembly)
- Material: Steel
- Thread: 7/8"-14 standard
- Country of Manufacture: United States
- Manufacturer: Redding
- Manufacturer Part Number: 75155
- UPC: 611760751554
- Shipping Weight: 0.45 lbs
What’s Included
- One Redding .308 Win Body Die
- Lock ring
- Plastic storage box
Frequently Asked Questions
What does the Redding .308 Win Body Die do differently than a full-length sizing die?
It full-length resizes the case body and bumps the shoulder back for easy chambering, but it leaves the case neck completely untouched. A standard full-length die sizes the neck too and usually runs an expander ball through it. This die is meant for handloaders who neck size for accuracy and just need to restore body dimensions and headspace.
Does the body die resize or decap the neck?
No. The 75155 has no internal parts, so there's no decapping pin or expander ball, and it does not touch the neck at all. You'll still want a separate neck sizing die and a decapping step in your workflow.
How do I set the amount of shoulder bump with this die?
You control the shoulder bump by adjusting the die's position relative to the shellholder, just like a conventional sizer. Thread it down a little more to set the shoulder back further, or back it off to bump less. Using a case comparator or headspace gauge lets you match the bump to your specific chamber for consistent results.
Will the Redding body die fit my press?
Yes, it uses the standard 7/8"-14 thread, so it threads into any common single-stage reloading press. It also uses the standard shellholder for the .308 Winchester, which is the same holder most presses use for the cartridge.





Reviews
There are no reviews yet.