0
0

Redding Type S Bushing Neck Die – 6mm Dasher (71648)

UPC: 611760716485

$90.99

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The 6mm Dasher lives and dies by consistency, and that is exactly where the Redding Type S Bushing Neck Die earns its keep. Instead of a fixed neck dimension, this die uses interchangeable sizing bushings so you can tune neck tension to match your brass and chamber. Because the bushing floats and self-centers on the case neck, you get noticeably better concentricity, which is the kind of detail that shows up on paper when you are chasing small groups at distance.

What the Redding Type S Neck Die Does Differently

Bushings are available in .001 inch increments (sold separately), so you can fine-tune how much the neck gets squeezed down. The adjustable decapping rod lets you position the bushing to size only part of the neck length if that is what your setup calls for. The rod comes with a standard sizing button, which is handy when you are running commercial brass as it comes and want the inside of the neck brought back to a uniform diameter. Redding also includes a decapping pin retainer so you can run the die without the button, a popular move for folks who sort or turn their necks for uniformity.

Picking a Bushing for the 6mm Dasher

The die arrives without bushings since the right size depends on your brass thickness and chamber neck. A common approach is to seat a few bullets in your brass, measure the loaded neck diameter, and subtract a couple thousandths to land on your tension. Many Dasher reloaders settle somewhere in the .265 to .268 range depending on turned or no-turn necks, so grabbing a bushing on each side of your target is smart insurance.

Built Like the Rest of the Redding Lineup

This is a neck-only sizing die, so it works the case neck without touching the body or bumping the shoulder. When your brass gets tight after several firings, pairing it with a Redding body die covers the rest. Machined from quality steel to the standard 7/8-14 thread, it drops into any common single stage press and carries the same fit and finish precision loaders have trusted from Redding for decades.

Key Specifications

  • Manufacturer: Redding
  • Cartridge: 6mm Dasher
  • Die Style: Type S Bushing Neck Sizing Die
  • Bullet Diameter: .243 in
  • Bushing Increments: .001 in (bushings sold separately)
  • Thread: 7/8-14
  • Shellholder: #1 (not included)
  • Manufacturer Part Number: 71648
  • UPC: 611760716485
  • Shipping Weight: 0.725 lb

What’s Included

  • Type S Bushing Neck Sizing Die
  • Adjustable decapping rod with standard sizing button
  • Decapping pin retainer (for use without the size button)
  • Die box / storage package

Frequently Asked Questions

Does the Redding Type S Bushing Neck Die come with bushings?

No, the die ships without bushings. Redding sells them separately in .001 inch increments so you can match the exact neck tension your brass and chamber need. The easiest way to pick a size is to measure the neck diameter of a few loaded rounds and subtract a couple thousandths.

What bushing size should I start with for the 6mm Dasher?

It depends on your brass thickness and whether you turn your necks, but many Dasher reloaders land in the .265 to .268 range. A good practice is to seat a few bullets, measure the loaded neck OD, and subtract .002 to .003 for tension. Buying a bushing on each side of your target gives you room to experiment.

Does this die resize the case body or bump the shoulder?

No, this is a neck-only sizing die, so it works the neck without touching the body or shoulder. That is ideal for brass fired in the same chamber. Once cases get tight after several firings, a Redding body die handles the body and shoulder bump.

Can I use this die without the expander button?

Yes. The decapping rod comes with a standard sizing button, but Redding also includes a decapping pin retainer so you can run the die without the button. That setup is popular with reloaders who sort or neck-turn their brass for uniform wall thickness and prefer bushing-only sizing.

Additional information

UPC

611760716485

Manufacturer

Manufacturer Part Number

71648

Shipping Weight

0.725

Reviews

There are no reviews yet.

Be the first to review “Redding Type S Bushing Neck Die – 6mm Dasher (71648)”