Description
The Redding Premium Series Handgun Die Set for 32 S&W Long and 32 H&R Magnum takes the guesswork out of loading these small-bore rounds. This is a three-die set that brings Redding's top-tier dies under one roof, so instead of piecing things together you get a sizer, expander, and micrometer seater that are all made to work as a unit. It also covers 327 Federal Magnum, which makes it a flexible choice if you run more than one 32-caliber wheelgun.
What Makes This Redding 32 S&W/32 H&R Die Set Tick
The sizing die uses a titanium carbide ring, which means you can skip the case lube on straight-wall brass and still get smooth, even resizing cycle after cycle. The carbide holds up to high-volume work and keeps brass moving without drag. Paired with it is Redding's special expander die, coated in titanium nitride for extra surface hardness and slickness. That expander does more than open the case mouth. It has a smooth entry radius, sizes the inside to the right diameter for a proper bullet fit, adds a concentric ring that opens the mouth just slightly for better bullet alignment, and finishes with a taper that can bell the mouth when you are seating lead bullets.
Micrometer Seating for Repeatable Depth
The seating die is where this set really earns the Premium name. It comes with a standard Bullet Seating Micrometer, so dialing in your seating depth is a matter of reading numbers instead of trial and error. If you change bullets or want to go back to a load you already worked up, you just set the micrometer and you are there. The dies are machined with a large entry taper and radius, which helps cases feed in cleanly and keeps you moving when you are loading in volume.
These dies thread into any standard 7/8-14 press and work well on single-stage and progressive setups alike. For anyone chasing accurate, concentric ammo out of a 32 H&R or 327 Federal, this set gives you the kind of control that turns good brass into reliable, repeatable rounds.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 66162
- UPC: 611760661624
- Calibers: 32 S&W Long / 32 H&R Magnum / 327 Federal Magnum
- Series: Premium Series
- Number of Dies: 3-Die Set
- Die Type: Handgun / Straight-Wall
- Sizing Die: Titanium Carbide (NxGEN) Sizing Die
- Expander Die: Special Expander Die, TiN-coated
- Seating Die: Premium Seating Die with Standard Bullet Seating Micrometer
- Bullet Diameter: 0.312 in
- Shellholder: #10
- Press Thread: 7/8-14
- Shipping Weight: 1.9 lb
- Country of Origin: United States
What’s Included
- Titanium Carbide (NxGEN) sizing die with decapping unit
- Special TiN-coated expander die
- Premium seating die with standard Bullet Seating Micrometer
- Instruction sheet
Frequently Asked Questions
How many dies come in the Redding 32 S&W/32 H&R Premium Series set?
This is a three-die set. You get a titanium carbide sizing die, a special TiN-coated expander die, and a Premium seating die with a built-in micrometer. The three work together as a complete loading solution for these cartridges.
Do I need case lube with the titanium carbide sizing die?
Because the sizer uses a titanium carbide ring, you can resize straight-wall 32 brass without lube and still get smooth, consistent strokes. That saves a step and a cleanup later. Some loaders still choose to lube when running very high volume, but it is not required.
Will this Redding die set load 327 Federal Magnum too?
Yes. Redding builds this set to cover 32 S&W Long, 32 H&R Magnum, and 327 Federal Magnum since they share the same case head and bullet diameter. That makes it a handy single set if you shoot more than one of these 32-caliber rounds.
What does the micrometer seating die actually do for me?
The micrometer lets you set and record your exact seating depth by the numbers rather than guessing and re-checking. If you switch bullets or come back to a proven load later, you just dial the micrometer to your saved setting. It takes a lot of the fiddling out of fine-tuning your rounds.




Reviews
There are no reviews yet.