Description
The .338 Lapua is a long-range heavyweight, and feeding it quality handloads makes a real difference downrange. Redding's Type S Elite Die Set is built for folks who want to dial in their brass instead of settling for whatever comes off the shelf. This set brings together three dies that let you size, seat, and tune your ammo to your rifle rather than the other way around.
What the Type S Elite Set Brings to the Bench
The set is made up of a Type S Bushing Full Length Sizing Die, a Type S Bushing Neck Sizing Die, and Redding's Competition Seating Die. Having both sizing dies in one package means you can full length resize when your brass needs it or neck size only when you want to extend case life and keep things gentle on the shoulders. Pull the bushing out and the full length die works as a body die while the neck die handles decapping, so there's a lot of flexibility packed into these three tools.
Neck Tension Control with the Type S Bushing System
Both sizing dies use interchangeable bushings to set neck diameter in .001 inch increments, which lets you fine tune neck tension without overworking the brass. The bushings float to self center on the case neck for better concentricity, and they're sold in hardened steel or with a TiN coating for extra lubricity. Worth noting: bushings and a shell holder are not included in the box, so you'll want to pick the right bushing sizes for your load and grab a #35 shell holder before you get rolling.
Seating That Keeps Everything Straight
The Competition Seating Die is where this set earns its keep. A sliding sleeve captures and aligns the case before the stem ever touches the bullet, and the micrometer top lets you adjust seating depth in repeatable, measurable increments. It ships with a standard seating stem that fits most .338 bullet designs, with VLD stems available separately if you run longer boat tail match projectiles. That kind of alignment is exactly what helps a .338 Lapua shooter chase tight groups at distance.
Key Specifications
- Manufacturer: Redding Reloading
- Cartridge: .338 Lapua Magnum
- Bullet Diameter: 0.338
- Die Type: Type S Bushing Full Length, Type S Bushing Neck, Competition Seating
- Number of Dies: 3
- Bushing Adjustment: 0.001 inch increments
- Shell Holder: #35 (sold separately)
- Thread: 7/8-14
- Material: Case Hardened Steel
- Manufacturer Part Number: 60594
- UPC: 611760605949
- Shipping Weight: 1.87 lbs
What’s Included
- Type S Bushing Full Length Sizing Die (with decapping/expander unit)
- Type S Bushing Neck Sizing Die (with decapping/expander unit)
- Competition Micrometer Bullet Seating Die with standard seating stem
- Plastic storage box (doubles as a case tray)
- Spare decapping pin
- Instructional literature
Frequently Asked Questions
Are bushings included with the Redding Type S Elite Die Set?
No, neck sizing bushings are sold separately with this set. You'll want to measure a loaded round or check your brass to determine the correct bushing size, then order the matching Redding bushing in hardened steel or TiN. The same goes for a shell holder, which is not included either.
What shell holder does the .338 Lapua Magnum version use?
The .338 Lapua Magnum uses a #35 shell holder with Redding dies. It's sold separately from this set, so plan on grabbing one if you don't already have it on the bench.
Can I neck size only with the Type S Elite Die Set, or just full length resize?
You can do both, which is the whole point of the Elite set. It includes a Type S Bushing Neck Sizing Die for neck sizing only and a Type S Bushing Full Length Die for full resizing, so you can choose your approach based on how the brass is fitting your chamber.
Will the Competition Seating Die work with long VLD style bullets?
The die ships with a standard seating stem that handles most .338 bullet designs just fine. For longer VLD or high BC match bullets, Redding offers a VLD profile stem separately that better fits the bullet nose. Note this seating die is not meant for compressed loads.




Reviews
There are no reviews yet.